3 Detailed instructions
Setting the volume of traffic announcements
The volume of the traffic announcement can be set independently of the normal volume.
-Push the SEL button for approx. 5 seconds. “SPKRS“ is indicated on the display.
- | Push the buttons << | or >> , possibly several times, until “TA LVL“ is |
| displayed. |
|
- | By pushing the BAND | button the volume can be set between |
| and +2. |
|
-Approx. 6 seconds after the last input has been made the device switches to normal operation. The setting is stored.
tep | 2 |
S |
Push (possibly several times) until “TA LVL“ is displayed
1 p e
t
S
Hold SEL for approx. 5 sec.;
“SPKRS“ is displayed
Shortly push BAND; setting is stored after approx. 6 sec.
S t ep 3
3 Detailed instructions
3.2.4 RDS functions
RDS (Radio Data System) displays, among other things, the following additional information broadcast by the station:
-Programme name:
The name is displayed upon reception.
-Programme type:
The type of the received programme can be called up by shortly pushing the buttons PTY or DISP.
-Identification of Automatic Traffic Announcement System programmes (TP): This function indicates if the programme broadcasts traffic announcements. If this is the case the letters “TP“ are displayed.
TP
-Identification of Traffic Announcement (TA): Traffic announcements are marked with “TA“ (see 3.2.3).
TA
-Alternative frequencies (AF): The data of alternative frequencies are transmitted as well. This enables the TechniSat WERRA 1 to always select the station of the programme with the best reception quality.
If alternative frequencies are available the letters “AF“ will be displayed. If no AF information is available the “AF“ display will flash. To ensure best reception quality, this function should always be activated.
AF
16