3 Detailed instructions
Searching for beginning of next title:
- Push the 
button.
3 Detailed instructions
Switching on the CD mode/reproducing a CD:
-Shortly push the MODE button.
The message “CHANGER“ is displayed.
The device winds the cassette to the beginning of the next title and switches to reproduction.
Searching for beginning of current title:
- Push the 
button.
The device rewinds the cassette to the beginning of the current title and switches to reproduction.
Switching off the AMS mode:
- Push the 4
SHUFF button once more.
AMS
The message “AMS“ disappears from the display.
Playback time is shown upon a short push
4 p e
t
S
tep | 3 |
S |
Push >> or << to select next resp. previous title
3.4 CD changer
You can also connect the TechniSat WerraDisc CD changer to your TechniSat WERRA 1. The changer can be controlled via the buttons of the car radio. Please note that your car radio is only suitable for the connection of a TechniSat CD changer. The connection of another CD changer may damage the car radio and the CD changer!
3.4.1Connection
Before connecting the CD changer to your car radio you should switch this off and disconnect it from the power supply.
Plug the
3.4.2Operation
Before operating the unit it is of course necessary to load the magazine of the CD changer with CDs. If the magazine shall not be loaded completely it is necessary to fit in the CDs starting from position 1 downwards (rf. CD changer operating instructions).
Shortly push to select CD
Shortly push to switch on
S t ep 2 | S t ep 1 |
The changer automatically inserts the first CD and starts playing it from the beginning.
If there is no CD available on the first position of the magazine the message “NO DISC“ will be displayed.
Selecting the CD:
After activating the CD mode the individual CDs can be selected as follows:
-By pushing the buttons 2
CD g resp. 3
CD h you can change between the individual CDs.
The number of the selected CD appears on the display.
20