Cassette unit, Inserting/ejecting a cassette

3 Detailed instructions

3.3 Cassette unit

The TechniSat WERRA 1 is equipped with a high-quality stereo auto reverse cassette drive mechanism. This is operated as follows:

3.3.1 Inserting/ejecting a cassette

Before you insert the cassette in the slot take care that the tape in the cassette is winded tightly. If this is not the case you can wind it with a pen or something similar and then insert it as follows:

-Insert the cassette in the slot. Take care that the opening through which the tape can be seen is on the right side. The cassette will now be played.

-The cassette ejector can be activated by pushing both

buttons completely and simultaneously.

	ep		tep	2	Push both buttons
		1	S
Insert the cassette	St

	with opening on	simultaneously;
		cassette will be
	the right side
		ejected

3.3.2 Changing the track/auto reverse

The TechniSat WERRA 1 is equipped with an auto reverse drive mechanism which, at the end of the cassette, automatically changes the running direction and plays the other side.

This function (changing of the track) can also be activated before the end of the cassette.

3 Detailed instructions

- Push both buttons

simultaneously, however, only halfway.

The running direction changes and the other side of the cassette is played

tep	1
S

Simultaneously push buttons halfway; cassette changes the running direction

3.3.3Fast Forward/Rewind

- Push the buttons or completely, depending on the direction in which the cassette shall be winded.

-If you want to interrupt the winding push the button which is not activated halfway.

The winding stops and the cassette will be played from this position.

tep	1
S

Push one button to wind; push other button halfway to stop