3 F110 Web Interface
Temperature Scale Conversion: You can select how the F110 displays the Temperature output on the Status page, either being Fahrenheit or Celsius.
Time & Date Configuration: Enter an IP address of a NTP server for the F110 to synchronize with for displaying current date and time information.
Trace Configuration: This feature enable you to open a secondary window to view communication between the F110 and other devices, such as a Mail Server, Modus Master and SNMP manager. This feature aids in troubleshooting if communication is not being made. To use Tracing Output, click on the enable tracing box, save your settings. Go back to the Advanced screen after the changes have been made and left click the View Tracing Output button.
Note If Daylight Savings Time is used in your location, be sure to toggle the “Daylight Savings Time'” checkbox when Daylight Savings Time is not being observed.
3.3.8 Reset Defaults
The Reset Factory Defaults button will reset the F110 to its default factory configuration, clearing any configuration changes made to the F110. Use this as a LAST resort if you are experiencing difficulties configuring the F110. You will have to rediscover the F110 once submitting. Write down the F110 MAC address before resetting to factory defaults.
Figure 3.9 Restore Defaults Prompt
www.rletech.com | 27 | 970.484.6510 |