3F110 Web Interface
3.3.2Email
The Email tab stores settings for the F110 to send Email Alert Notifications when alert thresholds are exceeded. In order to enable email alerting from the F110's web server interface, your mail server must have SMTP Relay enabled for either your network or the IP address of the F110. Contact your Email Administrator if you need assistance.
Enter the mail server address for the mail server you are using in the Mail Server Address field. The address can be entered as either the IP address or the DNS name of your mail server. If you wish to use a DNS name for the Mail Server Address field, you must assign a Static IP address, Gateway IP address, DNS Server IP address, and Subnet Mask on the Network tab.
In the Email Recipients fields, you can enter a single/regular email address, distribution list email address or mobile phone, pager or PDA email address (using
The Return Address (From) field MUST contain an email address for an active account on the mail server specified in the Mail Server Address field. For example, if 'mail.rletech.com' is entered in the Mail Server Address field, the Return Address (From) field must contain an email address with the 'mail.rletech.com' domain. Contact your email administrator if you require additional assistance.
The F110 can also do authenticated SMTP (ESMTP). Enter your user name and password in the fields and select the check box for Enable Authentication. You MUST save your settings before sending a test email. Refer to xrefpg. X for Trace output, to view mail transfer information between the F110 and mail server for troubleshooting.
Note You must save your settings before sending a test email.
Figure 3.4 Email Settings
www.rletech.com | 22 | 970.484.6510 |