Basic Operations
Adjusting the balance/fader
•The factory default setting is “0”. (Adjustment range: front 12 to rear 12)
[{]:
Emphasizes the sound from the front speakers.
[}]:
Emphasizes the sound from the rear speakers.
•The factory default setting is “0”. (Adjustment range: left 13 to right 13)
[[]:
Emphasizes the sound from the left speakers.
[]]:
Emphasizes the sound from the right speakers.
Adjusting the BASS
The bass gain, bass frequency (center frequency) and bass Q can be adjusted as follows.
GAIN:
FREQ.:
50Hz, 80Hz, 120Hz (The factory default setting is “50Hz”.)
Q:
1, 1.25, 1.5, 2 (The factory default setting is “1”.)
Adjusting the MID
The MID gain, MID frequency (center frequency) and MID Q can be adjusted as follows.
GAIN:
FREQ.:
700Hz, 1kHz, 2kHz (The factory default setting is “1kHz”.)
Q:
1.5, 2 (The factory default setting is “2”.)
Adjusting the TREBLE
The treble gain and treble frequency (center frequency) can be adjusted as follows.
2-1. Touch the []] key of the TREBLE item.
GAIN:
FREQ.:
8kHz, 12kHz (The factory default setting is “12kHz”.)
Adjusting the non fader output volume
You can adjust the volume output from the unit’s non fader output terminal.
Setting range:
Turning on/off the MAGNA BASS EXTEND
The Magna Bass Extend does not adjust the low sound area like the normal sound adjustment function, but emphasizes the deep bass sound area to provide you with a dynamic sound.
2-1. Touch the [C] key to display the next menu screen.
English Owner’s manual
VRX775VD 25