Clarion VRX775VD Adjusting the Clock, Basic Operations Setting the Auto Panel, Normal operation

Basic Operations

Setting the Auto Panel

When you remove or attach the DCP (Detachable Control Panel), you can set the liquid crystal panel automatically housing or opening.

• The factory default setting is “ON”.

Adjusting the CLOCK

Note:

•This setting is disabled when the Navigation system is connected. The clock is automatically adjusted using the CT (clock time) data in the GPS data.

English Owner’s

3-1. Touch the [C] key to display the next menu screen.

3-2. Touch the [ON], [OFF] or [CLOSE] key of the AUTO PANEL item to set to “ON”, “OFF” or “CLOSE”.

ON:

The liquid crystal panel houses automatically after removing the DCP. And the liquid crystal panel opens automatically after attaching the DCP.

OFF:

Normal operation.

CLOSE:

The liquid crystal panel houses automatically after removing the DCP.

1.Press the [ADJ] button, then touch the [CLOCK] key.

2.Touch the [{] and [}] keys under the Hour, Minute and a.m./p.m. box to adjust the time, then touch the [SET] key (The factory default setting is “1:00 a.m.”).

*The time is displayed in 12-hour format.

manual

Setting the time of air conditioner operation mode

This setting can be used to adjust the time the panel stays in the horizontal position when in the air conditioner operation mode.

• The factory default setting is 10 seconds.

3-1. Touch the [C] key to display the next menu screen.

3-2. Touch the [5s], [10s] or [30s] key of the HVAC MODE item to set the time to “5 seconds”, “10 seconds” or “30 seconds”.

VRX775VD 29