DVD Video Player Operations
English Owner’s manual
Changing DVD System Settings
Note:
•If the Setup operation is performed in the middle of DVD video play, the disc will restart from beginning.
•The settings on the DVD SETUP menu cannot be set with the remote control unit.
Setting up the screen size
Set up the screen size according to the rear view monitor which is connected to this unit.
•The factory default setting is “WIDE”.
●When watching through a conventional type of the rear view monitor (4:3)
Selecting the DVD SETUP menu
1.Press the [SRC] button, and touch the [DVD PLAYER] key.
The DVD PLAYER mode screen is displayed.
2.Touch the [Option] key to display the Option menu.
3.Touch the [Setup] key to display the DVD SETUP menu.
Touch the [C] key to display the next menu. Touch the [c] key to return to the previous menu.
4.Perform setting for the desired setting items. See the following sections for detail.
5.Touch the [Back] key.
*In the following sections, only the details regarding settings are described, the procedures to select items are skipped.
N PS:
The leftmost and rightmost areas of the screen are cut off.
This function allows displaying the important part of image fully on the screen. In some cases, image is displayed while being panned (scrolled).
N LB:
A black zone is created in the top and bottom areas of the screen.
This method displays Cinema Scope and Vista Vision images without cutting them off by creating a black zone on the top and bottom gaps.
●When watching through a wide type of the rear view monitor (16:9)
Setting up the angle mark display
You can set up so that the angle mark appears on scenes where the angles can be switched.
item to turn the Angle function “ON” or “OFF”.
• The factory default setting is “OFF”.
34 VRX775VD