DVD Changer Operations
English Owner’s manual
Only basic operations of DVD changer can be performed from the unit. Use the remote control unit to perform the following functions.
•Scan, Repeat, Random functions
•Video CD Playback function ON/OFF
•DVD Setup function, Audio, Subtitle, Angle setting function
For details on operations other than those described below, see the pages of “DVD Video Player Operations” (page 34).
For details on DVD changer precautions, refer to the supplied owner’s manual.
Note:
•When the DVD changer (VCZ625) is connected via optical cable, no sound will be output if AUDIO OUT is switched to ANALOG on the changer’s “GENERAL SETUP” menu.
•Set the “TV TYPE” of the DVD changer’s
“GENERAL SETUP” menu to the same setting as that set in the “Switching the VTR system between NTSC and PAL” of this unit.
Selecting a disc from the list
1.Touch the [List] key.
2.Touch the corresponding Disc key (1 to 6) to select the desired disc.
The disc changes to the specified disc.
Switching to a next disc (Disc Up function)
1.The disc up function plays from the first track (track No.1) of the next disc.
Press the [BAND] button.
Each time you press the [BAND] button, the disc changes to the next disc.
TV Operations
TV functions
To watch TV, requires a TV tuner. When an optional TV tuner is connected through the CeNET cable, this unit controls all TV tuner functions.
WARNING
For your safety, the driver should not watch the TV or operate the controls while driving. Please note that watching and operating the TV while driving are prohibited by law in some countries.
Watching TV
Note:
•For your safety, the VRX775VD has a safety function which turns off the picture when the car is moving, so only the audio can be heard. The picture can only be watched when the car is stopped and the parking brake is applied.
•If “AUDIO ONLY” appears on the screen just after turning on the ACC power of the car, release the parking brake while confirming safety, and then engage the parking brake again.
1.Press the [SRC] button, and touch the [TELEVISION] key.
2.Press the [BAND] button or touch the [Band] key to select the desired TV band (TV1 or TV2).
Every pressing the button toggles the TV band between TV1 and TV2.
3.Press the [R] or [F] button to tune in the previous or next preset TV station.
Watching a video
The TV tuner has a VTR input terminal to which 1 external device can be connected. Connect a 12V video cassette player (VCP) or video cassette recorder (VCR) to the TV tuner input terminal.
1.Touch the screen to display the TV/VTR mode menu, then touch the [Option] key.
2.Touch the [VTR] key to change to the VTR mode.
•To return to the TV broadcast, perform the same operation again.
Seek tuning
1.Press the [BAND] button or touch the [Band] key to select the desired TV band (TV1 or TV2).
*If “MANU” is displayed in the display, press and hold the [BAND] button for more than 1 second. “MANU” in the display goes off.
2.Touch the [X] or [x] key to automatically seek a station.
• Touching the [x] key to tune up the channel to the next available TV station, and the [X] key to tune down.
54 VRX775VD