Basic Operations
Warning display when CCD camera is installed
The following warning message is displayed during use of the CCD camera: “Make sure of safety around your vehicle”.
Switching the VTR system between NTSC and PAL
Note:
•This setting is applied only to the VISUAL/VTR input mode.
Changing the color of the background picture
Turning on/off the motion of the background picture
Adjusting the GENERAL
1.Press the [ADJ] button, then touch the [GENERAL] key.
*The [ADJ] buttons is enabled only when the panel is open.
2.Touch the [C] key to display the next menu screen if desired.
3.Perform the adjustment for the desired item. See the following sections for detail.
4.Touch the [Back] key to return to the previous screen.
*In the following sections, only the details regarding adjustments are described, procedures to select items are skipped.
Setting the BEEP
English Owner’s manual
Front monitor lock
When an external device is connected to the Visual terminal, lock the front monitor to show the visual input source.
Note:
•This function is enabled only when the CONNECT item of the GENERAL menu is set to other than “NONE”.
1.Press the [MAP] button to set the monitor lock.
The front monitor screen is locked to show the visual input source.
2.To cancel the monitor lock, press the [MAP] button.
The screen returns to show the image of the selected mode.
The sound heard when you make operations is called “beep”. The unit can be set up so that it does not produce this beep sound.
• The factory default setting is “ON”.
Setting the Blink LED
You can set the unit to blink the LED indication when the DCP (Detachable Control Panel) is removed.
VRX775VD 27