Installation
MOUNTING:
1.After reading the precautions, decide where you are going to install the unit.
2.Once the location has been determined, place the amplifier in position. Using a felt tip pen or pencil mark the four holes to be drilled for mounting. NEVER use the amplifier as a template for drilling.
It is very easy to damage the amplifier surface in manner.
3.Drill four 1/8” diameter holes into mounting surface of steel panel. If you choose to mount on MDF or wood panel, drill four 1/8” diameter holes into mounting surface.
4.It’s advisable to test the system before finally mounting of the amplifier.
5.Mount the amplifier using the supplied 4 self threading screws.
Installation Diagram
SELF TAP SCREWS 
3