Alesis 12R manual

Page 4

12.Use only with a cart, stand, bracket, or table designed for use with professional audio or music equipment. In any installation, make sure that injury or damage will not result from cables pulling on the apparatus and its mounting. If a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13.Unplug this apparatus during lightning storms or when unused for long periods of time.

14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15.This unit produces heat when operated normally. Operate in a well-ventilated area with at least six inches of clearance from peripheral equipment.

16.This product, in combination with an amplifier and headphones or speakers, may be capable of producing sound levels that could cause permanent hearing loss. Do not operate for a long period of time at a high volume level or at a level that is uncomfortable. If you experience any hearing loss or ringing in the ears, you should consult an audiologist.

17.Do not expose the apparatus to dripping or splashing. Do not place objects filled with liquids (flower vases, soft drink cans, coffee cups) on the apparatus.

18.WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

Image 4
Contents Reference Manual Page Important Safety Instructions Page Page Page Page Page CE Declaration Of Conformity Front Panel Table of Contents Dimensional Drawing ApplicationsUsing this manual IntroductionAlesis Multimix 12R Microphone Preamplifier/Mixer ConventionsGrounding Instructions AC power InstallationUnpacking Power switch Use clean powerMounting Inputs ConnectionsCable common sense Microphone Inputs Phantom power Line-level devices synthesizers, CD players, video Phantom Power will not be Used Tape in jacks Phonograph turntables Effects via Aux Send and Aux Return How to connect effect devices and signal processorsAbout stereo effect devices Using Aux 1 as an effects send Connecting an in-line processor Connections Outputs To a stereo PA system or instrument amplifierTo a mono system To a stage monitor foldback systemTo another mixer To a stereo tape recorderTo an Adat multitrack recorder In-line Adat recordingUsing two Multimix 12Rs for more flexibility Connections Phones Monitor OutConnections Operating Instructions Before turning the mixer on, zero out the controlsSetting input trim levels Peak LED methodMetering/Unity Gain method Typical Fader and Control Levels Unity gain pointsTrim gain ranges Aux Send levelsProper gain staging of other equipment How to Set Aux Send and Return Levels AUX System Effects Send/ReceivePage Using the meter Output distortionAvoiding noise System noise ground loops, hum, induced noise① to Eliminate HUM if the Above has Failed Page Operating Instructions Multitrack recording ApplicationsTracking/Overdubbing Mixdown Using the High and LOW EQ controls Monitoring AUX 1 in the Phones jack Troubleshooting Troubleshooting IndexPage Exterior cleaning Maintenance/ServiceRefer All Servicing to Qualified Technicians Connectors SpecificationsFrequency Response Levels ImpedanceNoise performance typical PowerDistortion THD+N Dimensional Drawing Block Diagram Level diagram Index TapeWarranty / Contact Alesis Contact Information