Alesis 12R manual Specifications, Frequency Response, Connectors

Specifications

SPECIFICATIONS

All measurements taken with an Audio Precision System One. All noise measurements taken with trim at minimum and faders at unity gain with 22 Hz to 22 kHz bandwidth unless otherwise specified. All In & Out measurements made on balanced +4 dBu connectors. (+4 dBu into a line input with faders at unity and the meter reading “0” will yield +4 dBu into a balanced load or -2 dBu into an unbalanced load.)

Frequency Response

10 Hz – 65 kHz +0/-1 dB	(any input to any output at
	nominal operating levels)
-3dB Point:	125 kHz

Connectors

MIC IN jacks:

LINE IN jacks:

INSERT jacks:

STEREO LINE IN and

STEREO AUX RETURN jacks:

MAIN OUT BALANCED,

MONITOR OUT, and

AUX SEND jacks:

MAIN OUT -10 dBV jacks:

TAPE IN jacks:

Female XLR

(Pin 1 ground, Pin 2 +, Pin 3 -)

Female 1/4" 3-conductor phone (Tip = +, ring = -, sleeve = ground)

Female 1/4" 3-conductor phone (Tip = send, ring = return, sleeve = ground)

Inserting plug to first "click" allows direct output without breaking normal signal flow

Female 1/4" 3-conductor x 2

Female 1/4" 3-conductor phone (Tip = +, ring = -, sleeve = ground)

Female phono ("RCA") jacks Female phono ("RCA") jacks

Multimix 12R Reference Manual 45