Kenwood TH-D7A instruction manual Cursor Keys, Band a & B, UP/ DWN keys, OK key, ESC key

CURSOR KEYS

1This transceiver employs 4 cursor keys so that you can

BAND A & B

In this manual, bands recalled beside “ ” and “ ” are

2

3

4

5

6

program most of the functions with only one hand.

referred to as band A and band B. The band A default is VHF (144 MHz) and the band B default is UHF. In band A you can also recall a 118 MHz sub-band (TH-D7A only). In band B you can also recall a VHF (144 MHz) sub-band.

This transceiver is capable of simultaneously receiving on 2 bands (A and B). So, for example, it is possible to

7UP/ DWN keys

8

The UP/ DWN keys function in the exact same way as

9the Tuning control. These keys change frequencies,

10 memory channels, or other selections, depending on the

11 current transceiver mode.

12	Note: You can use the Tuning control instead of the UP/ DWN keys in
	each operation step. This manual often omits the Tuning control to

13simplify descriptions.

14OK key

15

Press to move to the next step or to complete the setting

16in various selection modes such as Function Select or

17Menu mode.

18ESC key

19Press to move back to the previous step or to quit the

20setting in various selection modes such as Function

21Select or Menu mode.

22

23

receive packet data on one VHF frequency while receiving audio on another VHF frequency. To transmit, you must select either band. “ ” indicates the current data band {page 55}.

The following diagram should help you understand how to select or recall the desired band.

TH-D7A only

Note:

◆You cannot recall another band by pressing [F], [A/B] in Memory Recall mode. First press [VFO] to select VFO mode.

◆The 118 MHz band cannot be used for transmitting.

12