Kenwood TH-D7A Programming a Call Sign, 11 3 Press UP/ DWN to select a character, 13 4 Press OK

PROGRAMMING A CALL SIGN

1To transmit APRS data, first program your call sign using

You can also use the keypad to enter alphanumeric characters in step 3. For example, each press of [TNC] switches entry as A, B, C, then 2. Press [ENT] to enter

2

3

a maximum of 9 alphanumeric characters.

1Press [MENU] to enter Menu mode.

–.

Note: Unless you program a call sign, you cannot transmit APRS data.

42 Press [2], [1] to select “2–1 (MY CALL)”.

5• The display for entering characters appears; the first digit blinks. The default is “NOCALL”.

6

7		STA CON		96 BCONDUP
	7		9
5
8
9

10

113 Press [UP]/ [DWN] to select a character.

12• You can enter 0 to 9, A to Z, and –.

134 Press [OK].

14• The cursor moves to the next digit.

155 Repeat steps 3 and 4 to enter up to 9 digits.

16• Pressing [OK] after selecting the 9th digit completes the

17programming.

18• To complete programming after entering less than 9

digits, press [OK] twice.

19

20		• Each press of [ESC] causes the cursor to move
		backward.
21		• Pressing [A/B] deletes the digit at which the cursor is
22		blinking.
23	6	Press [MENU] to exit Menu mode.

66