Kenwood TS-780 manual Internal View, 3-4MICROPHONE

@ 430 MHz ANT connectorpI

0 1 4 4 MHz ANT connector-

OHeat sink -

rier level) control FM.MIC control

ery case for backup

ONE (Side tonel

@ ANTI-V (ANTI VOX)

10 DELAY (DELAY TIME) control @VOX - G (VOX GAIN) control

@ UP-DOWN Switch

@PTT Switch

6 A U X s o c k e t

This connector is used for controlling a linear amplifier, etc., or for external standby. For connection, use the sup- plied 7P plug (DIN type).

7 Power Connector (AC and DC)

For connection of the supplied AC power cord or the specified DC power cord (DC 13.8 V).

8 GND (earth) Terminal

For connection of an earth lead.

7@ CW KEY jack

- @ SP jack

- @ AUX socket

- @ Power connector

- @ GND terminal

u @ Fuse holder

9 Fuse Holder

A 2A fuse. When it blows, check the Cause and replace with the spare supplied.

3-3. INTERNAL VIEW

1 CAR. L (Carrier Level) Control

This control adjusts the carrier level in CW mode. lt does not function in other modes. Use the control within the ALC zone.

2 FM - MIC Control

This control adjusts the sensitivity of the microphone dur- ing FM transmission.

3 SIDE TONE Control

This control adjusts the monitoring level of side tone during CW Operation.

4 VOX - G Control

This control adjusts the sensitivity of the VOX controlled Operation.

5 DELAY (Delay Time) Control

This control adjusts the VOX time constant. Adjust i t according to the Speed of Speech.

6 ANTI-V (ANTI VOX) Control

This control is used to adjust the VOX System so that it is not tripped by Sound from the speaker.

7 Back - up Battery Case

Load battery into the case to back-up memory channels. Battery will last for about 1 year.

3-4 MICROPHONE

1PTT Switch

Press-to-talk switch for transmission.

2 UP - DOWN Switch

This switch is used to shift the VFO frequency up or down.

8