Pioneer XDV-P9II Troubleshooting, Common problems, Request repairs, Symptom Cause Remedy

Others

Troubleshooting

If you think there is			If the problem		If the problem still
something wrong			remains even after		remains.
with the unit.		\ checking.		\ Request repairs.
Before requesting			Reset the unit. (See
repairs, check the			page 6.)
following chart.
7 Common problems
	Symptom		Cause		Remedy
	Power doesn’t switch ON.		Leads and connectors are incor-		Confirm once more that all con-
	The unit doesn’t operate.		rectly connected.		nections are correct.
			A fuse has blown.		Fix the problem causing the
					blown fuse, and replace the old
					fuse with a new one of the same
					capacity.
			Noise and other factors are caus-		Press the RESET button. (See
			ing the built-in microprocessor		page 6.)
			to operate incorrectly.
	Operation with the remote		The remote control operation		Switch to the correct remote
	control isn’t possible.		mode is incorrect.		control mode. (See pages 7, 51
	The unit does not operate				and 52.)
	correctly even when the
			Battery power is low.		Load new battery. (See page 8.)
	appropriate remote control
			Some operations are prohibited		Check using another disc.
	buttons are pressed.
			with certain discs.
	Playback is not possible.		The disc is dirty.		Clean the disc. (See page 13.)
			The loaded disc is a type this		Check what type the disc is.
			unit cannot play.
			Non compatible video system		Change to a disc compatible to
			disc is loaded.		your video system.
	There’s no sound.		Connections are incorrect.		Check connections.
			With some discs, 96 kHz output		Switch the output setting to
			is prohibited.		48 kHz. (See page 49.)
			The unit is performing Still,		There is no sound during Still,
			Slow Motion or Frame-By-		Slow Motion or Frame-By-
			Frame playback.		Frame playback.

55