Pioneer XDV-P9II Using the Remote Controller, Precaution, Replacing the Lithium Battery

Using the Remote Controller

This product is equipped with a remote controller for convenient operation.

• Point the controller in the direction of the unit or remote sensor to operate.

Precaution:

•Do not store the remote controller in high temperatures or direct sunlight.

•The controller may not function properly in direct sunlight.

•Do not let the remote controller fall onto the floor, where it may become jammed under the brake or accelerator pedal.

Battery

•Slide the tray out on the back of the remote controller and insert the bat- tery with the (+) and (–) poles pointing in the proper direction.

Note:

• When using for the first time, pull out the film protruding from the tray.

Replacing the Lithium Battery:

• Use only lithium battery “CR2025”, 3 V.

Precaution:

•Remove the battery if the remote controller is not used for a month or longer.

•If the event of battery leakage, wipe the remote controller completely clean and install a new bat- tery.

WARNING:

•Keep the lithium battery out of reach of children. Should the battery be swallowed, immediately consult a doctor.

CAUTION:

•Do not recharge, disassemble, heat or dispose of battery in a fire.

•Use a CR2025 (3 V) lithium battery only. Never use other types of battery with this unit.

•Do not handle the battery with metallic tools.

•Do not store the lithium battery with metallic materials.

•When disposing of used batteries, please comply with governmental regulations or environmental public institution’s rules that apply in your country/area.

•Always check carefully that you are loading the battery with its (+) and (–) poles facing in the proper directions.

Before Using

8