Pioneer XDV-P9II Precaution, Case of Trouble, Preventing the Battery from Becoming Exhausted

Before Using

Precaution

• A “CLASS 1 LASER PRODUCT” label is affixed to the bottom of the player.

CLASS 1

LASER PRODUCT

•Keep this manual handy as a reference for operating procedures and precautions.

•Always keep the volume low enough for outside sounds to be audible.

•Protect the product from moisture.

•If the battery is disconnected, the preset memory will be erased and must be repro- grammed.

In Case of Trouble

Should this product fail to operate properly, contact your dealer or nearest authorized Pioneer Service Station.

Preventing the Battery from Becoming Exhausted

When using this product, be sure your car engine is running. If you use this product when your engine is not running, the battery will become exhausted.

Changing the Mode Switch Setting

Use a pen tip or other pointed instrument to select the correct setting of the Mode switch on the rear of this unit for the component you are using it with. After changing the setting, be sure to press the RESET button. (See page 6.)

(1) When using this product with a Pioneer compo-
nent featuring an IP-BUS input		STAND
• Select the IP-BUS mode.	IP-BUS	ALONE

(2)When using this product with a Pioneer compo- nent that does not feature an IP-BUS input, or another company’s product

• Select the STAND ALONE mode.

5