Section
04Installation
Important
!Check all connections and systems before final installation.
!Do not use unauthorized parts. Use of un- authorized parts may cause malfunctions.
!Consult your dealer if installation requires dril- ling of holes or other modifications to the vehi- cle.
!Do not install this unit where :
—it may interfere with operation of the vehi- cle.
—it may cause injury to a passenger as a re- sult of a sudden stop.
!The semiconductor laser will be damaged if it overheats. Install this unit away from hot places such as near the heater outlet.
!Optimum performance is obtained when the unit is installed at an angle of less than 60°.
60°
space behind the unit, use factory supplied mounting sleeve.
2Secure the mounting sleeve by using a screwdriver to bend the metal tabs (90°) into place.
Dashboard
Mounting sleeve
3 Install the unit.
Use commercially available parts when instal- ling.
Nut
!When installing, to ensure proper heat disper- sal when using this unit, make sure you leave ample space behind the rear panel and wrap any loose cables so they are not blocking the vents.
Screw
Filrewall or metal support
Metal strap
DIN front/rear mount
This unit can be properly installed either from “Front” (conventional DIN
Screw (M4 8)
#Make sure that the unit is installed securely in place. Unstable installation may cause this unit to malfunction, such as sound skip.
DIN Front-mount
Installation with metal strap and screws
1Insert the mounting sleeve into the dashboard.
When installing in a shallow space, use a sup- plied mounting sleeve. If there is enough
20 En