COMPONENT NAMES (continued)
Remote control
POWER button | RECALL button | |
| FUNCTION SELECT button | |
INPUT SELECT buttons | DVD CONTROL buttons | |
MENU button | FREEZE/RETURN button | |
OK button | SELECT/ADJUST button | |
| ||
SOUND MODE button | PICTURE MODE button | |
CH I/CH II button (TV) | ||
| ||
VOLUME UP/DOWN button | CHANNEL UP/DOWN button (TV) | |
| MUTE button | |
PROGRAM SELECT buttons |
| |
(TV) | MULTI PICTURE button | |
MULTI MODE button | ||
TV/TEXT button |
| |
(TV) | SWIVEL button |
ENGLISH
Loading Batteries
1. Open the battery cover.
• Slide back and remove the battery cover in the direction of the arrow.
2. Load batteries.
• Load two Size AA batteries included observing the correct polarities.
3. Close the battery cover.
• Replace the battery cover in the direction of the arrow and snap it back into place.
CAUTION
•Do not use new and old batteries together. The batteries could explode or leak, resulting in fires, physical injury, or stains.
•When loading batteries, observe their correct polarities as marked on the product. If loaded in the wrong direction, the batteries could explode or leak, resulting in fires, physical injury, or stains.
Handling the Remote Control
Use the remote control within about 5 m from front of the unit’s
With in 30 degrees | With in 30 degrees |
About 3m | About 3m |
| About 5m |
ATTENTION
•Do not drop or impact the remote control.
•Do not splash the remote control with water or put it on a wet object to avoid possible failures.
•Before leaving the remote control out of use for an extended period of time, remove the batteries from it.
•If the remote control begins to lack responsiveness, replace the batteries.
•Strong light such as direct sunlight impinging on the photoreceptor of the remote control can cause operational failure. Position this unit to avoid direct contact with such light.
9