DVD and SAT, Recall Video/RGB | Hitachi hitachi lcd monitor specification

COMPONENT NAMES (continued)

Remote control (continued)

	FUNCTION SELECT
	Press this button to indicate function
	mode with a lamp.	*1


DVD and SAT	*2

INPUT SELECT

Press this button to change input mode.

SOUND MODE

You may recall the sound mode by pressing this button. Each time pressed, sound mode is changed in following sequence.

Movie Music

Favorite Speech

CH I/II

This button is for A2 / NICAM models only.

PROGRAM SELECT

Press these buttons to select a TV program directly.

MULTI MODE

In multi-picture mode, pressing this button will change the multi-picture mode.

TIME (TV)

Pressing this button can indicate the time by On-Screen display when receiving a TV program on the screen including TELETEXT service with the time information.

ZOOM

Press this button can change Picture size.

*1 FUNCTION SELECT button

RECALL (TV)

With this button, the display change between “--”, “---”, “-” and AV00 on the top right hand corner of the screen. “--” is for 2 digit channel selection, “---” is for 3 digit channel selection and “-” is for 1 digit channel selection.

RECALL (Video/RGB)

Press this button to display input signal.

DVD CONTROL

You can use these buttons to operate the selected brand of DVD player.

FREEZE/RETURN

Press this button to change the picture to freeze mode. Press it again to return to normal picture.

PICTURE MODE

You may recall the picture mode by pressing this button. Each time pressed, picture mode is changed in following sequence.

Dynamic Natural Cinema

MUTE

Press this button to turn off the set sound. When press again or the volume up button, the audio will be restored.

MULTI PICTURE

Press this button to change the screen to multi-pictures. Press it again to return to normal picture.

PHOTO INPUT

These buttons are not available in this model.

SWIVEL

Press this button to rotate TV. Use cursor key ( ) to select the degree of rotation.

This remote control has functions to control other makers of DVD player, DVD Recorder, and Set Top Box as well as this set. Press the button to switch between TV, DVD and SAT modes.

Each time the button is pressed, the indicator will light below the function selected. For details, refer to 43 .

*2 LED

The LED indicator lamps for DVD and SAT have 2 modes (Lit or blinking).

Lit: Indicates the mode that has been selected. Press the button to change modes when the LED is lit.

Blinking: Indicates that the maker of DVD or STB can be set. You can set up the maker of DVD or STB while the LED is still blinking (30 sec). For details, refer to 43 44 .