Hitachi hitachi lcd monitor user manual Operating Instructions Setup Menu Video mode

Page 33

OPERATING INSTRUCTIONS (continued)

SETUP MENU (Video mode)

ENGLISH

Selected characters

Setup hint

System

Do not change the original setting.

(System1: Europe/Asia, System2: North America)

Color System

System1

This should correspond to the color system of the signal from the

equipment that is connected to AV1~AV5 video input terminal.

•

Normally, set this to Auto. The system of the input signal will be

AV1~AV5

automatically recognized.

System2

•

If the input signal contains much noise or has a low level at Auto and

the operation is found erratic, set this to match the input signal.

• When the component signal is received, this would be not available

(grayed out).

Video Input

This should correspond to the signal mode of the signal from the

equipment that is connected to AV1, AV2 video input terminal.

AV1, AV2

•

Normally, set this to Auto. The signal mode of the input signal will be

automatically recognized.

•

If the input signal contains much noise or has a low level at Auto and

the operation is found erratic, set this to match the input signal.

RGB1

This should correspond to the signal mode of the signal from the

equipment that is connected to RGB1 DVI terminal.

RGB2 (1st step)

This should correspond to the signal mode of the signal from the

equipment that is connected to RGB2 D-sub terminal.

This step should be set only when [Component] is selected on the 1st

step.

This should correspond to the signal mode of the signal from the

RGB2 (2nd step)

equipment that is connected to RGB2 D-sub terminal.

•

Normally, set this to Auto. The signal mode of the input signal will be

automatically recognized.

•

If the input signal contains much noise or has a low level at Auto and

the operation is found erratic, set this to match the input signal.

31

Image 33

Contents USER’S Manual Page Features Contents About the Symbols Safety InstructionsBe cautious of the power cord connection Safety Instructions About the SymbolsBe sure to keep safety ground connection Be careful in handling the battery of the remote controlRemove the power cord for complete separation Avoid a high temperature environmentBe careful in operating power swivel Installation environmentPrecaution during transportation Precautions for the cable connectionDo not physically impact the remote control Set the sound volume at a suitable levelUsing in low temperatures About the power swivelAbout screen defects About residual imagesMain Unit Component NamesOpen the battery cover Component Names Remote controlClose the battery cover Load batteriesRecall Video/RGB DVD and SATButtons on Remote Control Function Buttons for Teletext ModeUP / Down button Text / TV+TEXT button Color buttonsInstallation Installation InstructionsAnti-tumble measures Securing to a wall or pillarHdmi An example of connecting audio visual devicesPrecautions when connecting the antenna Connecting to a PC Device Installation Instructions Connecting to a PCMonitor rear panel DVD PlayerInstallation Instructions Connecting the Speaker Cables Ferrite coreAttach the speaker cables to speaker systems Power cord Connecting cable Installation Instructions Mounting the Side InputMount the side input into the speaker holder Speaker HolderInstallation Instructions Power Cord Connection Operating Instructions Turning Power On and OffIndicating lamp OperatingSize Switching Input SwitchingDisplay size selection diagram Operating InstructionsPress Using a wide-screen monitor Operating Instructions Size SwitchingDisplay area selection diagram RGB input PressOperating Instructions Volume Adjustment Volume setting value Adjustment status guide displayAudio Mute Adjust for preferred angle Operating Instructions Power SwivelPress Swivel button Controlling icon appears on the screenOperating Instructions Input Signal Screen Display Recall button Input Select buttons Operating Instructions Displaying Multi PictureButton UP/DOWN buttonPictures Pictures SplitFreeze button Picture FreezingSplit Strobe NTSC3.58/4.43 576i 480iExample Selecting the Picture screen from TV/Video mode Using the Menu Screen On-screen display systemMenu button OK button Recall button Return button Press the Menu button to display the Main Menu screenAbcde Operating Instructions Setup Menu TV modeSelected characters Setup hint Operating Instructions Setup Menu Video mode Auto Adjust Wxga ModeWvga Type Vertical Filter Frequency ModeFunction Menu Operating Instructions Picture Menu TV/Video mode Color Temperature Picture ModeContrast Mode Film ModeMagenta Color ManagementCyan Color DecodingOperating Instructions Picture Menu RGB mode Audio Menu Off Timer Timer MenuOn Timer Language MenuOther Features Automatic StoreMenu Display Registration condition A2 / Nicam / Sound Multiplex TV mode Other Features Audio SwitchingBilingual / Dual sound broadcast Stereo sound broadcastDVD Player/ STB Selection Other Features Power Save ModeSignal Check RGB mode Other Features DVD Player/STB SelectionTroubleshooting Symptoms That Seemingly Appear to be FailuresSymptom Point to check See Symptom Point to check See Symptom Troubleshooting Actions to Correct Abnormal DisplaysExample ExampleProduct Specifications Product Specifications Signal Input Product Specifications Recommended Signal List Signal Name Resolution Frequency kHz Frequency MHzSub Remarks KHz MHz Signal Name Resolution34.24 Wvga type On 640 480 864 48040.00 800 600 56.25