Hitachi hitachi lcd monitor user manual Auto Adjust, Wvga Type, Wxga Mode

OPERATING INSTRUCTIONS (continued)

SETUP MENU (RGB mode: RGB1 (DVI-PC), RGB2 (RGB))

￿	￿	￿￿
￿
	￿
	￿	￿

￿	￿￿
￿
￿	￿

￿ ￿

								￿
						￿
							￿
							￿
Selected characters										Setup hint
Auto Adjust*					Adjust				Horizontal Position. Vertical Position. Horizontal Clock and Clock
			Pressing the OK button here,
									Phase are adjusted automatically.
			Automatic regulation is started.
	Moves the horizontal position to left.		Moves the horizontal position to right.						Adjust the left-side display position.
Horizontal Position									Screen display changes to Magenta color if beyond the available
									range. (This function is only for RGB2. It’s not available (grayed
									out) for RGB1 (DVI-PC).)
	Moves down the vertical position		Moves up the vertical position.						Adjust the vertical display position.
Vertical Position									Screen display changes to Magenta color if beyond the available
									range. (This function is only for RGB2. It’s not available (grayed
									out) for RGB1 (DVI-PC).)
	Reduces the dot clock frequency		Increases the dot clock frequency
Horizontal Clock	(shrinks the right side).		(expands the right side).						Adjust for maximum character clarity.
									(This function is only for RGB2. It’s not available (grayed out) for
									RGB1 (DVI-PC).)
	Slows the dot clock phase (shifts		Advances the dot clock phase (shifts
Clock Phase	slightly to left).		slightly to right).						Adjust for clear character visibility.
									(This function is only for RGB2. It’s not available (grayed out) for
									RGB1 (DVI-PC).)
Reset	(off the function)			(waiting to reset)					The original factory settings for the items of this Menu page can
									be restored by pressing the OK button.
Input Level									Normally set to 0.7 V. If white is found to spread across the
									screen, set to 1.0 V. (This is effective only for RGB2.)
Frequency Display									Set this to Off if the frequency information of the Input Signal
									Screen Display is not required.
									This is only available for W-VGA signal.
WVGA Type									When it is set to On, the display area mode can be selected Full
									or Real. (With RGB1 INPUT, the screen remains the same. RGB2
									(ANALOG) INPUT only)
									This is only available for W-XGA signal.
WXGA Mode		O ff							(RGB2 (ANALOG) INPUT only)

32