Section
15 Initial Settings
Adjusting initial settings | Switching the auxiliary 1 setting |
1
1Function display
Shows the function names.
Using the initial settings, you can customize various system settings to achieve optimal per- formance from this unit.
1Touch the source icon and then touch Off to turn this unit off.
%Touch AUX1 on the initial menu to se- lect desired setting.
!Video – auxiliary video device connected with
!Audio – auxiliary device connected with stereo mini plug cable
!iPod – an iPod with video capabilities con- nected with
!Off – No auxiliary device is connected
Switching the auxiliary 2 setting
%Touch AUX2 on the initial menu to turn
auxiliary 2 setting on.
# To turn auxiliary 2 setting off, touch AUX2 again.
2Touch the screen to display the touch panel keys.
3Touch AV Menu and then touch
Initial Menu to display the function names. The function names are displayed and oper- able ones are highlighted.
4Touch ESC to return to the ordinary dis-
play.
# To return to the previous display, touch Back.
Switching the auxiliary setting
Auxiliary devices connected to this unit can be activated individually. Set each AUX source to ON when using. For more information about connecting or using auxiliary devices, refer to Using the AUX source on page 58.
Setting the rear output and subwoofer controller
This unit’s rear output (rear speaker leads out- put and RCA rear output) can be used for full- range speaker (Full) or subwoofer (Subwoofer) connection. If you switch the rear output setting to Subwoofer, you can connect a rear speaker lead directly to a sub- woofer without using an auxiliary amp. Initially, the unit is set for rear
!When the
1Touch Rear Speaker on the initial menu.
2Touch c or d next to Rear Speaker to switch the rear output setting.
Touch c to select
50 En