Setting up for hands-free phoning

	Section
Available accessories	19

!This unit does not have the name edit func- tion of a Phone Book entry.

%Touch the source icon and then touch TEL to select the telephone.

Note

The equalizer curve for the phone source is fixed. When selecting the phone source, you cannot perform the operation in the following section. Refer to Using the equalizer on page 43.

When the multi-channel processor is connected to this unit, you can operate the equalizer func- tion even when selecting the phone source. Refer to Recalling equalizer curves on page 89.

Before you can use the hands-free phoning function you must set up the unit for use with your cellular phone. This entails establishing a Bluetooth wireless connection between this unit and your phone, registering your phone with this unit, and adjusting the volume level.

1 Connection

For detailed instructions on connecting your phone to this unit via Bluetooth wireless tech- nology, refer to Connecting a cellular phone on the next page.

#Your phone should now be temporarily con- nected. However, to make best use of the technol- ogy, we recommend you register the phone to this unit.

2 Registration

To register your temporarily connected phone, refer to Registering a connected cellular phone on the next page.

3 Volume adjustment

Adjust the earpiece volume on your cellular phone for comfort. When adjusted, the volume level is recorded in this unit as the default set- ting.

#Caller’s voice volume and ring volume may vary depending on the type of cellular phone.

#If the difference between the ring volume and caller’s voice volume is big, overall volume level may become unstable.

#Before disconnecting the cellular phone from this unit, make sure to adjust the volume to a

proper level. If the volume is muted (zero level) on your cellular phone, the volume level of your cel- lular phone remains muted even after the cellular phone is disconnected.