Section |
|
|
|
|
18 |
| Other Functions |
|
|
|
|
|
|
|
| Adjusting the response | # To cancel the adjustment, press and hold | ||
| positions of the touch panels | MUTE. | ||
| 6 Gently touch the center of the + mark | |||
| (Touch Panel Calibration) | |||
| If you feel that the touch panel keys on the | displayed on the screen with the touch | ||
| panel adjustment pen. | |||
| screen deviate from the actual positions that | |||
| After you touch all the marks, the adjusted po- | |||
| respond to your touch, adjust the response po- | sition data is saved. | ||
| sitions of the touch panel. There are two ad- | # Do not turn off the engine while saving the ad- | ||
| justment methods: | justed position data. | ||
| which you touch four corners of the screen; | 7 Press and hold MUTE to complete the | ||
| and | |||
| adjustment. | |||
| ! Make sure to use the supplied pen for ad- |
|
| |
|
| justment, and gently touch the screen. If | Using the AUX source | |
|
| you press the touch panel forcefully, the | ||
|
| touch panel may be damaged. Do not use | A separately sold auxiliary device such as VCR | |
|
| a sharp pointed tool such as ballpoint pen | ||
|
| or portable device can be connected to this | ||
|
| or a mechanical pen. Otherwise the screen | ||
|
| unit. When connected, auxiliary device is auto- | ||
|
| is damaged. | ||
|
| matically recognized as AUX source and as- | ||
| ! If touch panel adjustment cannot be per- | |||
| signed to AUX. | |||
|
| formed properly, consult your local Pioneer | ||
|
|
|
| |
|
| dealer. |
|
|
1Touch the source icon and then touch
Off to turn this unit off.
# When the source icon is not displayed, you can display it by touching the screen.
2Press and hold h(eject).
The
3Touch each of the arrows on the four corners of the screen with the touch panel
adjustment pen.
# To cancel the adjustment, press and hold MUTE.
4Press DISP OFF to complete the
The adjusted position data is saved.
# Do not turn off the engine while saving the ad- justed position data.
5Press DISP OFF to proceed to the 16- point adjustment.
The
About AUX connection method
You have two methods to connect auxiliary de- vice to this unit.
Mini pin plug cable (AUX-1)
When connecting auxiliary device using a mini plug cable
iPod and portable audio/video player can be connected to this unit via mini plug cable.
!If an iPod with video capabilities is con- nected to this unit via 3.5 mm plug (4 pole) cable (e.g.,
!It is possible to connect a portable audio/ video player by using a 3.5 mm plug (4 pole) to RCA cable, which is sold sepa- rately. However, depending on the cable, re- verse connection between red (right side audio) cable and yellow (video) cable is re- quired. Otherwise, audio and video may not be correctly reproduced.
58 En