Pioneer RS-D7R, RS-P90 owner manual Memory protect function, Recall the memory refer to

Page 47

Memory protect function

In order to avoid accidentally erasing data which have been stored in memory, or to avoid replacing stored data, it is possible to set up a protect function for the following memory numbers.

When the protect function is ON, adjustment data storage operations are not accepted.

Note:

•Protect function ON/OFF switching is simultaneously performed for both memories. So, for exam- ple, if the protect function is switched ON for memory B1, it is switched ON for both base memory B1 and B2. Also, if the protect function is switched ON for M1, it is switched ON for both custom memory M1 and M2. However, the protect function does not operate for M3 and LM.

1.Recall the memory (refer to page 45).

Specify the memory number directly to recall the memory.

2.Press the RETURN button for two seconds to turn ON the protect function.

Press the button again for two seconds to cancel the protect function.

When turning the protect function ON/OFF

•Turning the protect function ON/OFF does not bring up anything on the display.

•When the protect function is turned ON and the user attempts to store new data in that memory, the “ ” appears to signify that data storage is not possible.

Audio Adjustment <Memory Function>

47

47

ENG/MASTER 96

Image 47

Contents RS-P90 Contents Display for the Person who Set Up Closed state Open state Remote control RS-D7RKey Finder Head unit RS-D7RKey Finder Opening and closing the remote control coverRemote control Menu display Menu display in closed state When the cover is closedWhen the cover is open When the cover is closed in the middle of operationAbout this unit Before Using This ProductKey Finder / Before Using This Product Product registration About this manualCase of trouble About the digital network Before Using This ProductRemove the covering Resetting the microprocessorAudio menu Audio AdjustmentSwitching to the audio menu Main menu Audio Adjustment MainBalance adjustment FAD/BAL Control Closed state Switching to the main menuBass/treble adjustment B/T Open state Press the Function button To select the setting Using the compression CP Open stateExperimenting with other positions Adjusting the listening position PS Open stateUsing the position selector Posi Button PositionUse the position selector function and select the position Fine tuning the positionPoints concerning fine tuning Time alignment adjustment function of the network menu Relation to time alignment adjustment functionIncrease or decrease the level with the 5/∞ buttons Source level adjustment SLA Open stateBand parametric equalizer 3B-PEQ Audio Adjustment EqualizerAbout the equalizer menu Band graphic equalizer 31B-GEQEqualizer menu Switching to the equalizer menuRelation between frequency characteristics and sound quality Points when adjusting the equalizer curve When completing the adjustment Adjusting the 31 band graphic equalizer Fine Open stateSwitch between right and left to set up the equalizer curve Select function Adjusting the 3 band parametric equalizer Fine Open stateAbout the adjustment using the parametric equalizer Separate 3 band adjustment for left/rightSetting the equalizer curve Switch between left and right to set up the equalizer curve Adjust other bandsCommon to 31B-GEQ and 3B-PEQ Flat function FLT Open stateClear function CLR Open state What is the multi-amp system? Audio Adjustment NetworkNetwork menu N.W Switching to the network menuTo cancel the network menu, press the Band button Audio Adjustment NetworkMeasuring the distance to be corrected Delay Time Time alignment adjustment T.A. Open stateSwitching to the time alignment adjustment mode Unit of distance must be centimeters NetworkPress Function buttons 1 or 2 and select the band to input Inputting the distance to be corrected Delay TimeAudio Adjustment Network Range Cut-off frequency Level adjustment H.P.F L.P.F Filter adjustment FTR Open stateAbout the slope Switching to the filter adjustment modeUsing the mute function MUT About the H.P.F. and L.P.FAdjusting the filter Switch between left and right channel to adjust the filter Press the 5/∞ buttons Adjust the level of each bandPress Function button 3 and adjust the slope of each filter Press Function button 4 and adjust the phase of each bandAdjusting the low-range effectively Important points in adjusting the slopeFor better frequency characteristics Adjusting the subwoofer effectivelyMinimum delay phase characteristics Minimum phase MIP Linear phase characteristics Linear phase LINCustom memory Audio Adjustment Memory FunctionsMemory functions of adjusted audio menu Memo Base memoryNetwork menu Switching to memory modeAudio Adjustment Memory Function Equalizer menuPress the Shift button to cancel memory mode Storing the adjustment data in memoryAdjust each audio menu Switch to the memory mode of each menu refer toSpecifying the memory number directly Close the cover of the remote controlRecalling data stored in memory Forward/reverse order Functions of equalizer menuMemory recall operations on the equalizer menu Specifying the memory number directlyPress the Function button to recall the memory Recall the memory refer to When turning the protect function ON/OFFMemory protect function Inputting the name Display for the Person who Set Up the Audio AdjustmentsInputting characters Switching to the edit mode Press the Menu button to switch to the audio menuSwitch the desired character type with Function button When removing the car battery Equalizer Memory Data MemoNetwork Filter characteristics Memory Data Memo Network Time alignmentConnecting the Units Routing the optical cable Setting exampleUsing the corrugated tube Connecting the UnitsRS-D7R Connection diagramConnecting the RCA input amplifier Connecting the leads Connecting the power terminalAttach the cable clamp Secure the optical cableInstall the unit to the vehicle InstallationInstalling the unit Install the brackets to the bottom of the unitSymptom Cause Remedy TroubleshootingChecklist Installation / TroubleshootingGeneral SpecificationsSpecifications Pioneer Corporation