Pioneer RS-P90, RS-D7R owner manual Specifications, General

Page 62

Specifications

GENERAL


Power Source	.......... DC 14.4 V (10.8 to 15.1 V allowable)
Grounding system		Negative type
Max. Current consumption		1 A
Fuse		4 A
Dimensions	240 (W) mm ⋅ 59 (H) mm ⋅ 240 (D) mm
Weight		3.6 kg

DSP/PREAMP

Tone controls (parametric)

Bass frequency		63 Hz, 100 Hz, 160 Hz, 250 Hz
Treble frequency		4 kHz, 6.3 kHz, 10 kHz, 16 kHz
Gain		±12 dB
31-band graphic equalizer (L/R independent)
Frequency	............................	20 Hz to 20 kHz, 1/3 oct.
Gain		±12 dB (0.5 dB)
3-band parametric equalizer (L/R independent)
Frequency	............................	20 Hz to 20 kHz, 1/3 oct.
Gain		±12 dB (0.5 dB)
Crossover network (L/R independent)
SUBWOOFER
...................	HPF frequency: 20 Hz to 100 Hz, 1/3 oct.
....................	LPF frequency: 40 Hz to 250 Hz, 1/3 oct.
.................................		Gain: +10 dB to –24 dB (0.5 dB)
LOW	HPF frequency: 25 Hz to 250 Hz, 1/3 oct.
..................	LPF frequency: 250 Hz to 10 kHz, 1/3 oct.
......................................		Gain: 0 dB to –24 dB (0.5 dB)
MID	HPF frequency: 160 Hz to 10 kHz, 1/3 oct.
....................	LPF frequency: 2 kHz to 20 kHz, 1/3 oct.
......................................		Gain: 0 dB to –24 dB (0.5 dB)
HIGH
................	HPF frequency: 1.6 kHz to 20 kHz, 1/3 oct.
....................	LPF frequency: 8 kHz to 20 kHz, 1/3 oct.
......................................		Gain: 0 dB to –24 dB (0.5 dB)
Slope
........... PASS, –6, –12, –18, –24, –36, –48, –72 dB/oct.
..............................		(PASS: no pass HPF-High channel)
Phase		NORMAL/REVERSE
Time alignment
(H/M/L ch)		0 cm to 192.5 cm (0.77 cm)
(SW ch)		0 cm to 385 cm (1.54 cm)
Position adjustment
...................	DISTANCE: 0 cm to 192.5 cm (0.77 cm)
....................................		Level: 0 dB to –30 dB (0.5 dB)
Sampling frequency		44.1 kHz
Digital input		Optical input
Analog Output	.....................................	RCA output (4 line)

62

RCA OUTPUT

Frequency responce	..............	10 Hz to 20 kHz, (–1, +0 dB)
Max. output level/impedance		..............................4 V/220 Ω
Distortion		0.002% (1 kHz, 20 kHz LPF)
Signal-to-noise ratio		115 dB (IHF-A network)
Separation	80 dB (100 Hz to 10 kHz, 20 kHz LPF)

Note:

•Specifications and the design are subject to possi- ble modification without notice due to improve- ments.

CRD320762 ENG/MASTER 96

Image 62

Contents RS-P90 Contents Display for the Person who Set Up Head unit RS-D7R Remote control RS-D7RKey Finder Closed state Open stateKey Finder Opening and closing the remote control coverRemote control Menu display When the cover is closed in the middle of operation When the cover is closedWhen the cover is open Menu display in closed stateAbout this unit Before Using This ProductKey Finder / Before Using This Product Product registration About this manualCase of trouble Before Using This Product About the digital networkResetting the microprocessor Remove the coveringAudio menu Audio AdjustmentSwitching to the audio menu Switching to the main menu Audio Adjustment MainBalance adjustment FAD/BAL Control Closed state Main menuBass/treble adjustment B/T Open state Using the compression CP Open state Press the Function button To select the settingButton Position Adjusting the listening position PS Open stateUsing the position selector Posi Experimenting with other positionsFine tuning the position Use the position selector function and select the positionPoints concerning fine tuning Relation to time alignment adjustment function Time alignment adjustment function of the network menuSource level adjustment SLA Open state Increase or decrease the level with the 5/∞ buttonsBand graphic equalizer 31B-GEQ Audio Adjustment EqualizerAbout the equalizer menu Band parametric equalizer 3B-PEQSwitching to the equalizer menu Equalizer menuRelation between frequency characteristics and sound quality Points when adjusting the equalizer curve When completing the adjustment Adjusting the 31 band graphic equalizer Fine Open stateSwitch between right and left to set up the equalizer curve Separate 3 band adjustment for left/right Adjusting the 3 band parametric equalizer Fine Open stateAbout the adjustment using the parametric equalizer Select functionSetting the equalizer curve Adjust other bands Switch between left and right to set up the equalizer curveFlat function FLT Open state Common to 31B-GEQ and 3B-PEQClear function CLR Open state Audio Adjustment Network What is the multi-amp system?Audio Adjustment Network Switching to the network menuTo cancel the network menu, press the Band button Network menu N.WMeasuring the distance to be corrected Delay Time Time alignment adjustment T.A. Open stateSwitching to the time alignment adjustment mode Network Unit of distance must be centimetersInputting the distance to be corrected Delay Time Press Function buttons 1 or 2 and select the band to inputAudio Adjustment Network Filter adjustment FTR Open state Range Cut-off frequency Level adjustment H.P.F L.P.FAbout the H.P.F. and L.P.F Switching to the filter adjustment modeUsing the mute function MUT About the slopeAdjusting the filter Press Function button 4 and adjust the phase of each band Press the 5/∞ buttons Adjust the level of each bandPress Function button 3 and adjust the slope of each filter Switch between left and right channel to adjust the filterAdjusting the subwoofer effectively Important points in adjusting the slopeFor better frequency characteristics Adjusting the low-range effectivelyLinear phase characteristics Linear phase LIN Minimum delay phase characteristics Minimum phase MIPBase memory Audio Adjustment Memory FunctionsMemory functions of adjusted audio menu Memo Custom memoryEqualizer menu Switching to memory modeAudio Adjustment Memory Function Network menuSwitch to the memory mode of each menu refer to Storing the adjustment data in memoryAdjust each audio menu Press the Shift button to cancel memory modeForward/reverse order Functions of equalizer menu Close the cover of the remote controlRecalling data stored in memory Specifying the memory number directlyMemory recall operations on the equalizer menu Specifying the memory number directlyPress the Function button to recall the memory Recall the memory refer to When turning the protect function ON/OFFMemory protect function Press the Menu button to switch to the audio menu Display for the Person who Set Up the Audio AdjustmentsInputting characters Switching to the edit mode Inputting the nameSwitch the desired character type with Function button When removing the car battery Memory Data Memo EqualizerNetwork Filter characteristics Network Time alignment Memory Data MemoConnecting the Units Connecting the Units Setting exampleUsing the corrugated tube Routing the optical cableConnection diagram RS-D7RConnecting the RCA input amplifier Connecting the power terminal Connecting the leadsSecure the optical cable Attach the cable clampInstall the brackets to the bottom of the unit InstallationInstalling the unit Install the unit to the vehicleInstallation / Troubleshooting TroubleshootingChecklist Symptom Cause RemedySpecifications GeneralSpecifications Pioneer Corporation