Pioneer RS-P90, RS-D7R owner manual Filter adjustment FTR Open state

Audio Adjustment <Network>

Filter adjustment <FTR> (Open state)

The following adjustments can be made during filter adjustments. Make the appropriate adjustments for the reproduced frequency band and characteristics of the connected speaker unit.

Filter frequency adjustment: Every 1/3 octave

Level adjustment: 0.5 dB/1 step

The cut-off frequencies of the high pass filter (H.P.F.) and the low pass filter (L.P.F.) of each band (subwoofer, low, mid, high) and the reproduction level of each band are set up.

Range	Cut-off frequency	Cut-off frequency	Level adjustment
	of H.P.F.	of L.P.F.	range
Subwoofer-range	20 Hz to 100 Hz	40 Hz to 250 Hz	–24 dB to +10 dB
Low-range	25 Hz to 250 Hz	250 Hz to 10 kHz	–24 dB to 0 dB
Mid-range	160 Hz to 10 kHz	2 kHz to 20 kHz	–24 dB to 0 dB
High-range	1.6 kHz to 20 kHz	8 kHz to 20 kHz	–24 dB to 0 dB

Slope adjustment: PASS, –6, –12, –18, –24, –36, –48, –72 dB/oct. (Every –6 dB/oct. steps)

The slope (inclination of attenuation of filter characteristics) of H.P.F. and L.P.F. is set up.

Note:

•When the slope is set as PASS, the audio signals bypass the filter circuit, cutting out the effect of the filter circuit.

•In order to protect the speaker unit, H.P.F. has no PASS set up for high ranges.

Level (dB)

0

Level adjustment

20

Reproduced frequency band: the signals for frequencies during += is reproduced.

Slope adjustment

100 1k 10k

Frequency (Hz)

Cut-off frequency of the L.P.F.

Cut-off frequency of the H.P.F.

36

36

ENG/MASTER 96