Pioneer AVIC-90DVD This is connected so that the navigation system can, Nect it, Fuse resistor

This product

Note:

Cords for this product and those for other products may be different colors even if they have the same function. When connecting this product to another product, refer to the sup- plied Installation manuals of both products and connect cords that have the same func- tion.

Power cord

Black, Orange/white, Red, Yellow

☞ See Page 13.

Yellow/black

When combining this navigation unit with a Pioneer car stereo, if the car stereo has yellow/black leads, connect them to those leads. In this way, when the guidance audio is output and when you operate the system by voice, the car stereo is automatically muted to reduce the car stereo volume.

ENGLISH ESPAÑOL DEUTSCH

Purple/white (REVERSEGEAR SIGNAL INPUT)	Connection method
This is connected so that the navigation system can
detect whether the car is moving forwards or back-	Clamp the backup lamp
wards. Connect the purple/white lead to the lead
	lead.
whose voltage changes when the shift lever is put
in reverse. Unless connected, the sensor may not
detect your car traveling forward/backward proper-	Clamp firmly with
ly, and thus the position of your car detected by the
	needle-nosed pliers.
sensor may be misaligned from the actual position.
Note: When you use the ND-PG1 speed pulse gen-
erator (sold separately), please make sure to con-	Backup lamp lead.
nect it.
Fuse resistor
Check the position of your car’s backup
lamp (the one that lights up when the
shift lever is in reverse [R]) and find the
backup lamp lead in the trunk.

FRANÇAIS ITALIANO NEDERLANDS

12