Pioneer DEH-2200UB owner manual Operating this unit Initial Settings

Section
01			Operating this unit
					Initial Settings
		There are six stored settings DYNAMIC (dynamic),
		VOCAL (vocal), NATURAL (natural), CUSTOM (cus-			1 Press SRC/OFF and hold until the unit
		tom), FLAT (flat) and POWERFUL (powerful).
					turns off.
!				When FLAT is selected no adjustments are made
				to the sound.	2 Press M.C. and hold until CLOCK SET ap-
1				Press M.C. to display the setting mode.
2				Turn M.C. to select the equalizer.	pears in the display.
				DYNAMIC—VOCAL—NATURAL—CUSTOM—
				FLAT—POWERFUL	3 Turn M.C. to select the initial setting.
3				Press M.C. to confirm the selection.	After selecting, perform the following proce-
		TONE CTRL (equalizer adjustment)			dures to set the initial setting.
		You can adjust the bass/mid/treble level.
					CLOCK SET (setting the clock)
!				Adjusted equalizer curve settings are stored in
				CUSTOM.	1 Press M.C. to display the setting mode.
1				Press M.C. to display the setting mode.
					2 Press M.C. to select the segment of the clock dis-
2				Press M.C. to select BASS (bass)/MID (mid)/TRE-
					play you wish to set.
				BLE (treble).	Hour—Minute
3				Turn M.C. to adjust the level.	As you select segments of the clock display, the
				Adjustment range: +6 to -6	selected segment flashes.
		LOUDNESS (loudness)			3 Turn M.C. to adjust the clock.
		Loudness compensates for deficiencies in the low-			AUX (auxiliary input)
		and high-frequency ranges at low volume.			Activate this setting when using auxiliary device con-
1				Press M.C. to display the setting mode.
					nected to this unit.
2				Turn M.C. to select the desired setting.
					1 Press M.C. to turn AUX on or off.
				OFF (off)—LOW(low)—HIGH (high)
					USB (plug and play)
3				Press M.C. to confirm the selection.
					This setting allows you to switch your source to USB/
		SLA (source level adjustment)
					IPOD automatically.
		SLA (Source level adjustment) lets you adjust the vo-
					1 Press M.C. to turn the plug and play on or off.
		lume level of each source to prevent radical changes			ON – When USB storage device/iPod is con-
		in volume when switching between sources.
					nected, the source is automatically switched to
!				Settings are based on the FM volume level, which
					USB/IPOD. If you disconnect your USB storage
				remains unchanged.
					device/iPod, this unit’s source is turned off.
				Before adjusting source levels, compare the FM
					OFF – When USB storage device/iPod is con-
				volume level with the level of the source you wish
					nected, the source is not switched to USB/IPOD
				to adjust.
					automatically. Please change the source to USB/
!				The AM volume level can also be adjusted with
					IPOD manually.
				source level adjustments.
					ILLUMI (illumination color)
1				Press M.C. to display the setting mode.
2				Turn M.C. to adjust the source volume.	You can select the desired illumination color.
				Adjustment range: +4 to –4
					1 Press M.C. to display the setting mode.
3				Press M.C. to confirm the selection.
					2 Turn M.C. to select the desired setting.
					RED (red)—GREEN (green)
				Notes	3 Press M.C. to confirm the selection.
	! When selecting FM as the source, you cannot				Note
				switch to SLA.
!			Operation is complete even if the menu is can-		Operation is complete even if the menu is can-
				celled before being confirmed.	celled before being confirmed.

12 En