BenQ XL2410T user manual Connect the PC video cable, Either

Page 8

You might want to adjust the monitor stand height. See Adjusting the monitor stand height on page 11 for more information.

You should position the monitor and angle the screen to minimize unwanted reflections from other light sources.

2. Connect the PC video cable

Do not use both DVI-D cable and D-Sub cable on the same PC. The only case in which both cables can be used is if they are connected to two different PCs with appropriate video systems. (Not available for analog-only models).

To Connect the D-Sub Cable

Connect the plug of the D-Sub cable (at the end without the ferrite filter) to the monitor video socket. Connect the other end of the cable (at the end with the ferrite filter) to the computer video socket.

Tighten all finger screws to prevent the plugs from accidently falling out during use.

-5	O	~ +20	O
	O

Either

8 How to assemble your monitor hardware

Image 8

Contents Welcome Care And Cleaning CopyrightDisclaimer ServicingTable of Contents Getting started Getting started Back view Getting to know your monitorFront view How to assemble your monitor hardware Attach the monitor baseConnect the PC video cable EitherConnect the headphones Connect the power cable to the monitorPicture may differ from product supplied for your region Adjusting the monitor stand height Adjust the monitor to the desired viewing angle Rotating the monitorPivot the display Fully extend the monitor and tilt itPrepare the monitor and area Viewing angle adjustmentHow to detach the stand base Using the monitor wall mounting kit Remove the monitor baseRemove the monitor stand Then pull the monitor stand backward away from the monitorGetting the most from your BenQ monitor How to install the monitor on a new computer Click Finish Restart the computerHow to upgrade the monitor on an existing computer Click Close How to install on Windows 7 systemClick the Hardware tab How to install on Windows Vista systems Click the Monitor tab and the Properties buttonHow to install on Windows XP system Click the Driver tab and the Update Driver buttonClick the Properties button Click FinishSystem requirements How to watch 3D content on your monitorSafety information for watching 3D content Picture optimization How to adjust your monitor Control panelHot key mode Display Mode hot keySmart Scaling hot key Input hot keyMain menu mode Adjustment Display menuPhase Position Adjusts the horizontal Press Keys toAdjust the value Position Picture menu Between light and darkGamma value tone Standard value for WindowsDefault color Bluish Applies a cool tint Settings RedAdjust the value Factory defaultsPicture Advanced menu To return to the previous menu, press the Menu buttonFunction Operation Range Picture Mode With low powerPress Keys to Standard Will be saved User Game-2 forPress the or keys to change the settings Overscan Full Aspect 19W 22WAvailable when You can press the Smart Mode is set to Display by a digit number 17, 19W, orInstant Mode Adjusts the image Press Keys to on Smart Scaling Resizes the display PressColor Format Press the Enter key to RGBYUV Color Format is YUVAudio menu Sub VGA System menuTo that appropriate to your Language Sets the OSD menu Press Keys to English French GermanItalian SpanishPress Menu to leave the OSD Settings menu Allows the monitor settingsAuto Power Off Sets the time to power off Factory default valuesTroubleshooting Frequently asked questions FAQNeed more help? Is the prompt on the display illuminated in orange?

2. Connect the PC video cable

~ +20

Either