BenQ XL2410T user manual Connect the headphones, Connect the power cable to the monitor

Page 9

To Connect the DVI-D Dual Link Cable

Connect the plug of the DVI-D Dual Link cable to the monitor video socket. Connect the other end of the cable to the computer video socket.

Tighten all finger screws to prevent the plugs from accidently falling out during use.

The DVI-D format is used for direct digital connection

between source video and digital LCD monitors or projectors. The DVI-D Dual Link cable is used to transfer video signals to a monitor that runs in 120 Hz refresh rate or 3D video signals. Video signals that are compatible with DVI-D Dual Link format produce a superior quality picture than analog and other DVI formats.

To Connect the HDMI Cable

Connect the plug of the HDMI cable to the HDMI port on the monitor.

Connect the other end of the cable to the HDMI port of a digital output device.

3. Connect the headphones.

You may connect headphones to the headphone jack found on the left side of the monitor.

The audio output is available only when the audio signals are input through HDMI.

4. Connect the power cable to the monitor.

Plug one end of the power cord into the socket labelled ‘POWER IN’ on the rear of the monitor. Do not connect the other end to a power outlet just yet.

Or

Or

How to assemble your monitor hardware

9

Image 9

Contents Welcome Copyright Care And CleaningDisclaimer ServicingTable of Contents Getting started Getting started Getting to know your monitor Front viewBack view Attach the monitor base How to assemble your monitor hardwareEither Connect the PC video cableConnect the power cable to the monitor Connect the headphonesPicture may differ from product supplied for your region Adjusting the monitor stand height Rotating the monitor Adjust the monitor to the desired viewing anglePivot the display Fully extend the monitor and tilt itViewing angle adjustment How to detach the stand basePrepare the monitor and area Remove the monitor base Using the monitor wall mounting kitRemove the monitor stand Then pull the monitor stand backward away from the monitorGetting the most from your BenQ monitor Click Finish Restart the computer How to install the monitor on a new computerHow to upgrade the monitor on an existing computer How to install on Windows 7 system Click the Hardware tabClick Close Click the Monitor tab and the Properties button How to install on Windows Vista systemsClick the Driver tab and the Update Driver button How to install on Windows XP systemClick the Properties button Click FinishHow to watch 3D content on your monitor Safety information for watching 3D contentSystem requirements Picture optimization Control panel How to adjust your monitorDisplay Mode hot key Hot key modeSmart Scaling hot key Input hot keyMain menu mode Display menu AdjustmentPosition Adjusts the horizontal Press Keys to Adjust the value PositionPhase Between light and dark Picture menuGamma value tone Standard value for WindowsSettings Red Default color Bluish Applies a cool tintAdjust the value Factory defaultsTo return to the previous menu, press the Menu button Picture Advanced menuWith low power Function Operation Range Picture ModePress Keys to Standard Will be saved User Game-2 forOverscan Full Aspect 19W 22W Press the or keys to change the settingsMode is set to Display by a digit number 17, 19W, or Available when You can press the SmartInstant Mode Adjusts the image Press Keys to on Smart Scaling Resizes the display PressPress the Enter key to RGB Color FormatYUV Color Format is YUVAudio menu System menu To that appropriate to yourSub VGA German Language Sets the OSD menu Press Keys to English FrenchItalian SpanishAllows the monitor settings Press Menu to leave the OSD Settings menuAuto Power Off Sets the time to power off Factory default valuesFrequently asked questions FAQ TroubleshootingIs the prompt on the display illuminated in orange? Need more help?