Dakota Digital 3 operation manual Service and Repair

Page 32

VFD3 Specifications

SUPPLY

Voltage Input (+12) Range

 

8 to 22 V

INPUTS

 

 

 

Active High

 

 

 

Low Max

 

Min High

High, Left, Right

3.75 V

 

8.4 V

Gear, Wait, DIM

3.75 V

 

8.4 V

Active

Low

 

 

 

Low Max

 

Min High

SW1,SW2, Check

2.7 V

 

6.0 V

Brake, Cruise, 4 X 4

3.75 V

 

8.4 V

Tachometer

 

 

Setting

Low Max

 

High Min

Normal

3.0 V

 

7.6 V

Low Volt

0.9 V

 

4.1 V

Speedometer

Square Wave

 

Sin Wave

> 1.2 VP-P

 

> 1.4 VP-P

OUTPUTS

 

WARN, SPD

 

< 600 mA

 

 

 

Current

Draw

 

Ignition On

 

750 mA

SERVICE AND REPAIR

DAKOTA DIGITAL offers complete service and repair of its product line. In addition, technical consultation is available to help you work through any questions or problems you may be having installing one of our products. Please read through the Troubleshooting Guide. There, you will find the solution to most problems.

Should you ever need to send the unit back for repairs, please call our technical support line,

(605)332-6513, to request a Return Merchandise Authorization number. Package the product in a good quality box along with plenty of packing material. Ship the product by UPS or insured Parcel Post. Be sure to include the RMA number on the package, and include a complete description of the problem with RMA number, your full name and address (street address preferred), and a telephone number where you can be reached during the day. Any returns for warranty work must include a copy of the dated sales receipt from your place of purchase. Send no money. We will bill you after repair.

Dakota Digital Limited Lifetime Warranty

DAKOTA DIGITAL warrants to the ORIGINAL PURCHASER of this product that should it, under normal use and condition, be proven defective in material or workmanship for the lifetime of the original vehicle it was installed in, such defect(s) will be repaired or replaced at Dakota Digital’s option.

This warranty does not cover nor extend to damage to the vehicle’s systems, and does not cover removal or reinstallation of the product. This Warranty does not apply to any product or part thereof which in the opinion of the Company has been damaged through alteration, improper installation, mishandling, misuse, neglect, or accident.

This Warranty is in lieu of all other expressed warranties or liabilities. Any implied warranties, including any implied warranty of merchantability, shall be limited to the duration of this written warranty. No person or representative is authorized to assume, for Dakota Digital, any liability other than expressed herein in connection with the sale of this product.

32

MAN 650066:D

Image 32
Contents Series NOW with Solid State Sensor TechnologyTypical Display Setups Mounting Single Lens Systems Mounting Universal Display Systems with SubpanelsMounting Systems with Displays Mounted to Aluminum Mounting Kits Into Original Dashes Complete Systems mounted in new bezelGauge System Features Message Displays DescriptionWiring the control box into the vehicle Control BOX MountingGround Terminal DescriptionsStatus LED Power TachWarn DIMSPD + SPD SNDSPD SPD OUTSW 1 or Speed switch ADJ SNDADJ WTR SNDWTR OIL +OIL SND OILFuel SND FuelCruise Wait +Right + BrakeDisplay Ribbon Cable Check ENGAUX. I/O Setting up the control box Speedometer SETUP/CALIBRATION Speed sensor setup SenderMAN 650066D Tachometer Setup Exit setup DoneEngine cylinder setup T-CAL Speed Output OutputVolt Setup Display update setup UpdateRpm warning setup Warn Tach signal setup SignalTemp warning setup Warn Water Temp SetupTemp sensor setup Sender OIL Pressure Setup Exit water temp setup DoneOil pressure warning setup Warn Temp sensor test TestOil pressure sensor test Test Fuel SetupExit oil pressure setup Done Fuel sensor setup Sender Exit fuel setup Done Performance Menu SetupNighttime DIM Setup Information Menu BUS Interface Module SetupOdometer Preset Menu Troubleshooting Guide MAN 650066D MAN 650066D Clock Instructions For VFD systems with a clock built Troubleshooting guide Service and Repair