JVC TM-H1950CG manual Display and Selections in the SET-UP Menu Mode Setting

DISPLAY AND SELECTIONS IN THE <SET-UP MENU> MODE (SETTING)

You can set the following set-up menu items.

• PICTURE SUB ADJ.	• WHITE BALANCE	• REMOTE SYSTEM
• H. POSITION	• CONTROL LOCK	• INPUT REMOTE
• V. POSITION	• STATUS DISPLAY

Notes:

●Parameters for PICTURE SUB ADJ., H. POSITION and V. POSITION can be set separately depending on the signal (Input A (VIDEO), Input B (VIDEO), Input C or Input D) selected with the input select buttons on the front panel.

Select the required video input with the input select buttons on the front panel in advance.

●WHITE BALANCE can be set independently at 6500 or 9300 for the color temperature value.

Set COLOR TEMP. to 6500 or 9300 on the <MENU> screen beforehand.

●INPUT REMOTE is shown when REMOTE SYSTEM is set to MAKE.

<SET-UP MENU> screen

1<SET-UP MENU>

4 PICTURE SUB ADJ.

H. POSITION	:	00
V. POSITION	:	00
WHITE BALANCE
CONTROL LOCK	: OFF
STATUS DISPLAY	: ON
REMOTE SYSTEM	: MAKE
INPUT REMOTE	: A – D
2		3
EXIT		4
CHROMA CONTRAST VOLUME/SELECT		MENU
PHASE BRIGHT

1.While pressing the MENU button, press the CHROMA/PHASE button.

CHROMA	MENU	The <SET-UP MENU> screen is displayed.
		* The on-screen display goes off automatically after about five
PHASE		minutes with operation performed.

2.Press the CHROMA/PHASE or CONTRAST/BRIGHT button to select the desired menu item.

<Front panel buttons>

1Selection mark (4): Indicates the menu item you select.

2Menu item: Menu items you can

select.

3Setting display: Indicates the

current settings (value).

4Function display: The functions of the front panel buttons (5 buttons on the left) correspond to the function displayed.

ENGLISH

CHROMA CONTRAST

PHASE BRIGHT

PICTURE SUB ADJ.

H.POSITION V. POSITION

WHITE BALANCE

CONTROL LOCK

STATUS DISPLAY

REMOTE SYSTEM

INPUT REMOTE

A selection mark (4) is put next to the selected item.

Front panel	Function	Contents
button	displayed
CHROMA/		Forward selection mark (4)
PHASE
CONTRAST/		4
BRIGHT		Reverse selection mark ( )

Function	Contents
displayed
	Forward the menu item.
	Reverse the menu item.
–	Lower the adjustment
	value. (to the minimum)
+	Raise the adjustment
	value. (to the maximum)
4	Forward the setting value.
1	Reverse the setting value.
EXIT	Exit the <MENU>
	screen.
DRV	Selects DRIVE adjustment.

3. Press the VOLUME/SELECT buttons to set.

VOLUME/SELECT	Front panel	Function	Contents
	button	displayed
	VOLUME/	+	Increase (to max. value)
		4	Forward the setting value
	SELECT (+)
		CUTO	Selects CUT OFF setting screen
	VOLUME/	–	Decrease (to min. value)
	SELECT (–)	1	Reverse the setting value
		DRV	Selects DRIVE setting screen

Notes:

●For WHITE BALANCE items, select the CUT OFF or DRIVE setting screen, then select the function display for adjustment.

●Press the EXIT (MENU) button to return to the <SET-UP MENU> screen.

CUTO	Selects CUT OFF
	adjustment.
RB	Adjusts red and blue
	signal level.
RGB	Adjusts red, green and
	blue signal level.
	Turns the ON-SCREEN
	display on or off. (This
DISP function is effective only
	in the DRIVE or CUT OFF
	adjustment mode.)

13