TROUBLESHOOTING
Solutions to common problems related to your monitor are described here. If none of the solutions presented here solves the problem, unplug the monitor and consult a
Problems | Points to be checked | Measures (Remedy) | |
|
|
| |
No power supply. | Is the power plug loosened or disconnected? | Firmly insert the power plug. | |
|
|
| |
| Is the main power turned OFF? | Turn the main power ON. (See page 6.) | |
|
|
| |
No picture with the | Is the video signal output from the connected | Set the connected component correctly. | |
power on. | component? |
| |
|
|
| |
| Is the input signal selected properly? | Select the required video signal input with the | |
|
| Input select button. (See page 10.) | |
|
|
| |
| Is the video cable disconnected? | Connect the video signal cable firmly. | |
|
| (See pages 16 and 17.) | |
|
|
| |
No sound. | Is the audio signal output from the connected | Set the connected component correctly. | |
| component? |
| |
|
|
| |
| Is the volume output set to minimum? | Adjust the speaker volume with the VOLUME/ | |
|
| SELECT button. (See page 10.) | |
|
|
| |
| Is the audio cable disconnected? | Connect the audio signal cable firmly. | |
|
| (See pags 16 and 17.) | |
|
|
| |
Shaking picture. | Is the monitor close to a device generating a | Move the device away from the monitor until the | |
| strong magnetic field? | picture stabilizes. | |
|
|
| |
No colors, wrong | Is the color system selected properly? | Set COLOR SYSTEM in the <MENU> screen to | |
color, or dark picture. |
| AUTO. (See page 12.) | |
|
|
| |
| Has the picture control setting (CONTRAST, | Set each picture control to the standard setting. | |
| BRIGHT, CHROMA or PHASE) been changed? | (See page 9.) | |
|
| Press the COLOR OFF button and BLUE CHECK | |
|
| button to adjust. (See page 11.) | |
|
|
| |
Unnatural, irregularly | Is the monitor close to a speaker, magnet or any | Move the device away from the monitor and turn | |
colored, or distorted | other device generating a strong magnetic field? | the monitor’s power off. Wait at least 30 minutes, | |
picture. |
| then turn the power on again. | |
|
|
| |
Dark stripes appear | Is the aspect ratio set to 16:9? | Switch the aspect ratio to 4:3 with the ASPECT | |
at the top and bottom |
| button on the front panel. | |
of the screen, picture |
|
| |
vertically squeezed. |
|
| |
|
|
| |
The overall picture | Has the UNDER SCAN button been pressed so | Press the UNDER SCAN button to turn off the | |
size is too small. | the UNDER SCAN button lights? | button. (See page 4.) | |
|
|
| |
Function buttons on | Has control of the buttons been locked? (Has | Set CONTROL LOCK in the | |
the front panel do not | the CONTROL LOCK function been set to ON?) | screen to OFF. (See pages 13 and 14.) | |
function. |
|
| |
The INPUT SELECT |
|
| |
Is input selection under external control? (Has | Set REMOTE ENABLE to OFF (invalid). | ||
buttons do not | |||
the REMOTE ENABLE function been set to | (See page 18.) | ||
function. | |||
valid?) |
| ||
|
| ||
|
|
|
The following are not malfunctions:
●When a bright still image (such as a white cloth) is displayed for a long period, it may appear to be colored. This is due to the structure of the cathode ray tube and will be deleted when another image is displayed.
●You experience a mild electric shock when you touch the picture tube. This phenomenon is due to a normal buildup of static electricity on the CRT and is not harmful.
●The monitor emits a strange sound when the room temperature changes suddenly. This is only a problem if an abnormality appears on the screen as well.
●If two or more monitors are operated next to each other, their images may shake or be distorted. This phenomenon is due to mutual interference; it is not a malfunction. Move the monitors away from each other until the interference disappears or turn the power off on any monitor that is not being used.
ENGLISH
19