JVC TM-H1950CG manual Specifications

SPECIFICATIONS

MODEL		TM-H1950CG			TM-H1750CG
Type			Color video monitor
Color system			PAL, NTSC (3.58)
Picture tube		49 cm (19") measured diagonally,			44 cm (17") measured diagonally,
		90° deflection, in-line gun,			90° deflection, in-line gun,
		trio-dot type			trio-dot type
		(phosphor dot-trio pitch 0.27 mm)			(phosphor dot-trio pitch 0.27 mm)
Effective screen size		Width	365.8 mm (14-5/8")		Width	327.5 mm (12-7/8")
		Height	274.3 mm (10-7/8")		Height	246.2 mm (9-5/8")
		Diagonal	457.2 mm (18")		Diagonal	407.1 mm (16-1/32")
Scanning frequency			H: 15.734 kHz (NTSC), 15.625 kHz (PAL)
			V: 59.94 Hz (NTSC) 50 Hz (PAL)
Horizontal resolution			750 TV lines or more
			(Y/C input mode)
Input terminals	VIDEO A		Composite video: 1 line, BNC connector x 2,
			1 V(p-p), 75 Ω, negative sync
			(bridge connection possible, auto termination)
	VIDEO B		Composite video: 1 line, BNC connector x 2,
			1 V(p-p), 75 Ω, negative sync
			(bridge connection possible, auto termination)
			Y/C-separated: 1 line, mini-DIN 4-pin connector x 2
			Y: 1.0 V (p-p), 75 Ω
		C (BURST): 0.286 V (p-p), 75 Ω (NTSC) 0.3 V (p-p), 75 Ω (PAL)
			(bridge connection possible, auto termination)
	AUDIO A	1 line (monaural), RCA pin x 2, 0.5 V(rms), high-impedance
			(bridge connection possible)
	AUDIO B	1 line (monaural), RCA pin x 2, 0.5 V(rms), high-impedance
			(bridge connection possible)
	REMOTE	Point-of-contact connection, 1 line D-sub connector (15-pin, 3-line)
Audio power output				1 W
Built-in speaker			8 cm round x 1, impedance of 8 Ω
Environmental conditions			Operation temperature: 5°C – 40°C (41°F – 104°F)
			Operation humidity: 20 % – 80 % (non-condensing)
Power requirements			120 V/230 V AC, 50 Hz/ 60 Hz
Power consumption		1.3 A (120 V AC)/0.9 A (230 V AC)			1.2 A (120 V AC)/0.8 A (230 V AC)
Dimensions		Width	440 mm (17-3/8")		Width	395 mm (15-5/8")
		Height	375 mm (14-7/8")		Height	334 mm (13-1/4")
		Depth	496 mm (19-5/8")		Depth	418 mm (16-1/2")
Weight		25.6 kg (56.3 lbs)			20.1 kg (44.3 lbs)
		(not including input card)			(not including input card)
Accessory			AC power cord
			POWER CORD HOLDER x 1 (case and cover)
			Screw x 2 (POWER CORD HOLDER)

*Illustrations used in this manual are for explanatory purposes only. The appearance of the actual product may differ slightly.

*Dimensions and weight are approximate.

*E. & O. E. Design and specifications subject to change without notice.

20