PREPARATION
INSTALLING THE INPUT CARD
1.Turn off the Color Video Monitor’s main power and unplug the power cable from the AC outlet.
2.Unscrew the screws and remove the slot cover from the slot (on the rear side of the monitor) in which you are going to install the card.
Rear side of the
SLOT
REMOTE
VIDEO A
IN
VIDEO B
IN
IN
Slot cover
OUT
OUT
Y/C
3.Insert the Input Card’s board
Fit the board to the guide rails.
Knob
REMOTE
VIDEO A
IN
VIDEO B
IN
IN
SLOT
Guide rails
OUT
OUT
Y/C
Input card (the illustration shown is of the
Knob
4.Push the Input Card in so that its front panel touches the monitor’s rear panel.
5.Secure the Input Card by replacing the screws removed in Procedure 2.
SLOT
REMOTE
VIDEO A
INOUT
VIDEO B
INOUT
IN
Y/C
NOTE : Do not touch the terminal connected to the monitor or board pattern. Do not remove slot covers from the monitor’s slots if they are not in use.
8