CONTROLS AND FEATURES
FRONT VIEW
<Front Panel>
1
CHROMA CONTRAST | VOLUME/SELECT | MENU | UNDER | COLOR | BLUE | |
SCAN | OFF | CHECK ASPECT | ||||
|
|
|
15
PHASE BRIGHT
|
|
|
|
| POWER |
A | B | C | SLOT | D |
INPUT SELECT
2
3
4
5
6
7
8
9 
10
11
12
13
14
(Front view of
1 Tally lamp
Lights when the tally control signal is ON. The tally control signal is input through the REMOTE (external control) remote terminal. For details, refer to Page 18.
2 Chroma/Phase button
[
CHROMA/
PHASE]
Press this button to activate the picture color density adjustment mode or picture hue adjustment mode. Each time you press the button, the adjustment item changes.
Picture color density f Picture hue
8 Blue Check button [BLUE CHECK]
Cuts red and green signal components. Only blue signal components are shown. Press the button again to restore the normal image.
When selected, this button lights.
9 Aspect button [ASPECT]
Press this button to change the aspect ratio from 4:3 to 16:9.
10 Input A (VIDEO) button [INPUT SELECT A]
Selects the video and audio signals input to the VIDEO A
Adjust the value with the VOLUME/SELECT buttons 4. Also used as a control button in the menu function mode.
*and AUDIO A q terminals on the rear panel. The button lights when selected.
3 Contrast/Brightness button
[CONTRAST 
/ BRIGHT 
]
Press this button to activate the picture contrast adjustment mode or picture brightness adjustment mode. Each time you press the button, the adjustment item changes.
Picture contrast f Picture brightness
Adjust the value with the VOLUME/SELECT buttons 4. Also used as a control button in the menu function mode.
4 Volume/Select buttons
[VOLUME/SELECT – 
+]
Adjusts the speaker volume. Also used as a control button in the menu function mode.
5 Menu button [MENU]
Displays and disappears the <MENU> screen. Pressing the CHROMA/PHASE button 2 with the Menu button depressed will display the
6 Under Scan button [UNDER SCAN]
Reduces the screen size to display the entire image. Press the button again to cancel Under Scan. When selected, the Under Scan button lights.
7 Color Off button [COLOR OFF]
Cuts color signals to display a black and white image. Press the button again to restore the original color. When selected, the COLOR OFF button lights.
Note:
●This function is invalid with RGB input.
11 Input B (VIDEO Y/C) button [INPUT SELECT B]
Selects the video and audio signals input to the VIDEO B
(or VIDEO B (Y/C) ) and AUDIO B w terminals on the rear panel. The button lights when selected.
Note:
●The VIDEO B terminals include a video terminal (BNC connector) and a Y/C terminal
12 Input C/D (Slot) buttons [INPUT SELECT C/D (SLOT)]
Selects the signals to be input via the input cards installed in the rear panel card slots.
C, D: Selects the image from the input card in the slot. For details on input connectors and using the INPUT SELECT button, refer to page 7.
13 Power indicator
Unlit : The main power is OFF.
Orange : The main power is ON, but the monitor’s power is OFF (in the
Green : The main power is ON, and the monitor’s power is ON (in the normal operation mode).
14 Power switch [POWER
]
Press the power switch to turn the monitor’s power ON or OFF when the main power is ON.
Note:
●When RUSH DELAY is set to SLOW, it takes about three seconds before power is actually supplied after the power switch is pressed.
15 Speaker
A
4