JVC TM-H1950CG manual Contents

Page 4

POWER CONNECTION

The power supply voltage rating of this product is AC 120 V (For U.S.A. and Canada only) and AC 230 V (For European countries or United Kingdom), the power cord attached conforms to the following power supply voltage and countries. Use only the power cord designated to ensure Safety and EMC regulations of each countries.

Power cord

Power supply voltage : AC 120 V

AC 230 V

AC 230 V

Countries

: U.S.A. and Canada

European countries

United Kingdom

Warning:

●Do not use the same Power Cord for AC 120 V as for AC 230 V. Doing so may cause malfunction, electric shock or fire.

Note for the United Kingdom power cord only

The plug on the United Kingdom power cord has a built-in fuse. When replacing the fuse, be sure to use only a correctly rated approved type, re-fit the fuse cover.

(Consult your dealer or qualified service personnel.)

How to replace the fuse

Open the fuse compartment with the blade screw driver, and replace the fuse.

(* An example is shown in the illustration.)

SCREEN BURN

Fuse

●It is not recommended to keep a certain still image displayed on screen for a long time as well as displaying extremely bright images on screen. This may cause a burning (sticking) phenomenon on the screen of cathode-ray tube. This problem does not occur as far as displaying normal video playback motion images.

Supplementary Explanation

= Information for monitor operation =

This monitor uses a high precision CRT (cathode ray tube). Please follow the procedures below.

*For stable operation of the CRT, approximately 30 minutes running time is required from the time the power is turned on.

*When the monitor is installed, it can be easily affected by surrounding magnetic fields, which can generate irregular color on the screen. When it is difficult to eradicate, degauss from outside using a degausser, etc.

CONTENTS

 

SAFETY PRECAUTIONS

2

CONTROLS AND FEATURES

4

CONTROLS AND FEATURES (INPUT CARD: OPTIONAL)

7

PREPARATION

8

 INSTALLING THE INPUT CARD

8

 ATTACHING THE POWER CORD HOLDER

9

HOW TO HANDLE BASIC OPERATIONS

10

HOW TO USE THE MENU FUNCTIONS

12

HOW TO INITIALIZE THE SETTING

15

BASIC CONNECTION EXAMPLE

16

HOW TO USE EXTERNAL CONTROL

18

TROUBLESHOOTING

19

SPECIFICATIONS

20

APPENDIX

22

ENGLISH

3

Page 3 Page 5
Image 4
Page 3 Page 5
Contents TM-H1750CG Color Video MonitorTM-H1950CG TM-H1750CG Safety Precautions FCC Information U.S.A. onlyContents Controls and Features Front ViewRear View Main power switch Power cordAC inlet AC For Europe COMPONENT/RGB Input Card Optional IF-C01COMG  SDI Input Card Optional IF-C01SDGVideo input/output terminals Audio input/output terminals Installing the Input Card Preparation Attaching the Power Cord Holder Use only the provided screwsHOW to Handle Basic Operations Picture AdjustmentItems VOLUME/SELECT button Basic OperationVideo Signal Controls Use these buttons for video signal control Blue Check No effect with RGB inputDisplay and Selection in the Menu Screen Mode Setting HOW to USE the Menu FunctionsFront panel Function Contents Button Displayed You can set the following set-up menu items Display and Selections in the SET-UP Menu Mode SettingSET-UP Menu screen is displayed HOW to USE the Menu Set-up menu items Purpose SettingsHOW to Initialize the Setting Screen Display and Selections in the SET-UP Menu Reset ModePress the VOLUME/SELECT + button Initial settings Video B Video Connection Example Select Input B Video Basic Connection Example Video B Y/C Connection Example Select Input B Y/C HOW to USE External Control Names Functions Operations OFF p onTroubleshooting Specifications Asterisks * are used to indicate front panel dimensions Side ViewPin No Signal GND Y GND CMemo TM-H1950CG/TM -H1750CG Color Video Monitor
Related manuals
Manual 16 pages 22.46 Kb
Top Page Image Contents