Jensen VM8023HD operation manual Program Search, Preset Stations, Preview Scan, Automatic Store

VM8023HD

•Use the remote control arrow keys and ENTER button to select a multicast channel.

Press and hold the PGM button to change between "Auto", "Digital" and "Analog". When set to “AUTO”, the station will first be received in Analog but will change to Digital when a digital signal is detected and the HD icon will illuminate. If the digital signal becomes unavailable, the unit will revert to Analog reception.

Program Search

To view the Program Type categories when listening to HD Radio broadcasting, press the DISP button on the control panel (7) or remote control (23). Program type categories are listed, allowing listeners to find similar programming by genre. When a Program Type category is selected, the radio will start scanning for stations broadcasting in the selected category. Use the TUNE/TRACK >> or << buttons (17) to change the category.

Preset Stations

You can store up to 18 presets for FM and 6 presets for AM, which can then be instantly recalled by pressing the associated preset button (8-13). To store a station, turn the radio on and select the desired band and station. Press and hold the desired preset button (numbered one through six on the face of the radio or remote control) for more than two seconds. When stored, the preset number will appear in the display. The station is now stored and can be recalled by pressing the corresponding preset button. Repeat for the remaining five presets on the current band and for presets on the other four bands.

NOTE: Multicast stations can be stored as presets, but the unit must be in Digital or Auto reception mode to receive them.

Preview Scan

Press the button (16) to scan and play all strong stations for 5 seconds each. Press again to stop scanning and play the current station.

Automatic Store

Press and hold the button (16) to select either 18 strong FM stations or 6 AM and store them for quick access using the Automatic Store (AS) feature. AS only stores stations for the current band. After entering the stations into memory, the unit will automatically stop at each station for five seconds, allowing you to preview each selection. When using the AS feature, the new stations replace any stations already stored in preset memory.

NOTE: You can stop the Automatic Store function at any time by pressing the button again.

12