5: Set the Monitor Width
CauTION
Avoid potential injuries and / or property damage! Do not use the monitor manufacturer’s “screen size”; you must measure the width of the monitor case, including any speakers attached to the sides.
CauTION
The LA112 restricts movement based up on the TV widteh set on the side controls. The TV widthe must be set correctly before operating the LA112.
To set the monitor width, determine the correct code from the chart below.
Insert the power cord [08] into the plug on the arm assembly, then connect the power cord to a grounded outlet.
Turn the power switch [A] to the ON position. Insert the selector pin [07] into the receptacle [B] and press until the correct code is displayed.
Press and hold the “Set” button [C] until the display stops blinking to accept the code.
CODEWIDTH
C1 102 - 113 cm (40 - 44.9 in.)
C2 114 - 123 cm (45 - 48.9 in.)
C3 124 - 140 cm (49 - 55.9 in.)
C4 141 - 155 cm (56 - 61.0 in.)
Measure monitor width, including any speakers
[A]
[07]
[B]
[C]
Selector
Set
[08]