Sanus Systems LA112 manual Mount Wall Plate, For Wood Stud Walls, Min .5 cm 2.5

Page 7

3: Mount Wall Plate

For Wood Stud Walls

1/8 in.

Max. 43 cm (17 in.)

[01]

6x

2x

Min. 6.5 cm (2.5 in.)

6x

[10]

6x

6901-100189 <01>

Image 7

Contents Backed by CLO LA112Measure width between holes Supplied Parts and HardwareMeasure height between holes 14 x 01 x 02 x 04 x05 x 06 x 07 x 10 x 11 x 12 x 08 x6901-100189 Remove Wall Plate from Arm Remove Mounting Brackets For Wood Stud Walls Mount Wall PlateMin .5 cm 2.5 For Concrete Block or Brick Walls Install Arm Assembly to Wall Plate Selector Set Set the Monitor WidthTop Install Mounting Brackets18, 19 12, 13, 14, 15, 16 21, 22 Route Cables For Power Outlets Located Outside the BellowsFor Power Outlets Located Inside the Bellows Install Monitor to Wall Plate Calibrate Arm to the Monitor Reset the LA112 Home PositionAdjust Monitor Position Calibrate the ArmCBL mode Page Up Using the Remote ControlPress Programming the Preset Position KeysProgramming the Remote to Operate an Existing TV TV Programming Codes Programming CodesTV Brand Code Numbers RCA NECSSS TMKKLH DVD Programming CodesDVD Brand Code Numbers JVCVCR Brand Code Numbers VCR Programming CodesSTS TeacBrand Code Numbers For Cable BoxesA1,A2, or A3 is displayed on control box TroubleshootingHow to Correct Arm Will Not MoveC1,C2,C3 or C4 is displayed on control box Power Switch Control Box LED Display Selector Set ButtonHC is displayed on control box H1,H2, or H3 is displayed on control box If Your TV Leans Forward at the Home Position MaintenanceHome Automation Controls To register by mail WarrantyPurchaser Information Product Information