Sanus Systems LA112 manual For Concrete Block or Brick Walls

Page 8

For Concrete Block or Brick Walls

1/2 in.

[01]

Min. 6.5 cm (2.5 in.)

6x

[10]

6x

6x

[11]

6x

CauTION

Avoid potential injuries and / or property damage! Never drill into the mortar between concrete blocks!

6901-100189 <01>

Image 8

Contents LA112 Backed by CLOMeasure height between holes Supplied Parts and HardwareMeasure width between holes 01 x 02 x 04 x 05 x 06 x 07 x10 x 11 x 12 x 08 x 14 x6901-100189 Remove Wall Plate from Arm Remove Mounting Brackets Min .5 cm 2.5 Mount Wall PlateFor Wood Stud Walls For Concrete Block or Brick Walls Install Arm Assembly to Wall Plate Set the Monitor Width Selector Set18, 19 12, 13, 14, 15, 16 21, 22 Install Mounting BracketsTop For Power Outlets Located Outside the Bellows Route CablesFor Power Outlets Located Inside the Bellows Install Monitor to Wall Plate Reset the LA112 Home Position Adjust Monitor PositionCalibrate the Arm Calibrate Arm to the MonitorUsing the Remote Control CBL mode Page UpProgramming the Preset Position Keys PressProgramming the Remote to Operate an Existing TV TV Brand Code Numbers Programming CodesTV Programming Codes NEC SSSTMK RCADVD Programming Codes DVD Brand Code NumbersJVC KLHVCR Programming Codes VCR Brand Code NumbersTeac STSFor Cable Boxes Brand Code NumbersTroubleshooting How to CorrectArm Will Not Move A1,A2, or A3 is displayed on control boxPower Switch Control Box LED Display Selector Set Button C1,C2,C3 or C4 is displayed on control boxHC is displayed on control box H1,H2, or H3 is displayed on control box Maintenance If Your TV Leans Forward at the Home PositionHome Automation Controls Warranty Purchaser InformationProduct Information To register by mail