Sanus Systems LA112 Warranty, Purchaser Information, Product Information, To register by mail

Page 31

Warranty

Sanus Systems and CLO warrants this product, under normal use, to be free from defects in material and workmanship for a period of one year from the date of original purchase. Sanus Systems and CLO will, upon their discretion, repair or replace such defective equipment within the warranty period free of charge provided that the products are returned prepaid to CLO. Thereafter, repairs will be made at established factory prices. Unauthorized service or repair by anyone other than authorized CLO personnel renders this Warranty void and releases Sanus Systems and CLO from any further responsibility or obligation. LA112 mounting brackets are intended for use only with the maximum weight of 180 lbs (81 kg) and overall outside TV width up to 63” (160 cm). Any damage caused by failure to observe proper packing or to observe instructions for installation or by installing a TV over the specified maximim weight and/or maximim width prescribed, by accident or in transit or elsewhere will not be covered by the Warranty. This Warranty is in lieu of all other Warranties expressed or implied, and no one is authorized to assume any liability on behalf of Sanus Systems or CLO, or impose any obligation on Sanus Systems or CLO, in connection with the sale of any product other than as outlined above. In no event will responsibility be assumed or implied for consequential damage arising from the theft of any product secured by a CLO security device, by delay of installation, interrupted operation or other causes.

For updates and information about the LA112, please visit our website at www.sanus.com.

Your sales receipt is rquired for this Warranty to be applicable.

In order to receive warranty service, your product must be registered within 30 days of purchase by mail. To register by mail, fill out the Warranty Registration Card and mail it in with your original receipt.

To register by mail:

1.Fill out the Warranty Registration Card (below).

2.Provide a copy of your original sales receipt.

3.Mail both the card and the original sales receipt to the following address:

Warranty Registration

CLO Systems, LLC

1501 West Cameron Ave., Suite 215

West Covina, CA 91790

Cut here

Warranty Registration Card

Purchaser Information

First Name:

Last Name:

Address:

City:

State:

Phone #:

E-mail:

Product Information

Model #

Serial #

Place of

Purchase:

Date of

Purchase:

mm/dd/yyyy

6901-100189 <01>

Image 31
Contents Backed by CLO LA112Measure width between holes Supplied Parts and HardwareMeasure height between holes 14 x 01 x 02 x 04 x05 x 06 x 07 x 10 x 11 x 12 x 08 x6901-100189 Remove Wall Plate from Arm Remove Mounting Brackets For Wood Stud Walls Mount Wall PlateMin .5 cm 2.5 For Concrete Block or Brick Walls Install Arm Assembly to Wall Plate Selector Set Set the Monitor WidthTop Install Mounting Brackets18, 19 12, 13, 14, 15, 16 21, 22 Route Cables For Power Outlets Located Outside the BellowsFor Power Outlets Located Inside the Bellows Install Monitor to Wall Plate Calibrate Arm to the Monitor Reset the LA112 Home PositionAdjust Monitor Position Calibrate the ArmCBL mode Page Up Using the Remote ControlPress Programming the Preset Position KeysProgramming the Remote to Operate an Existing TV TV Programming Codes Programming CodesTV Brand Code Numbers RCA NECSSS TMKKLH DVD Programming CodesDVD Brand Code Numbers JVCVCR Brand Code Numbers VCR Programming CodesSTS TeacBrand Code Numbers For Cable BoxesA1,A2, or A3 is displayed on control box TroubleshootingHow to Correct Arm Will Not MoveC1,C2,C3 or C4 is displayed on control box Power Switch Control Box LED Display Selector Set ButtonHC is displayed on control box H1,H2, or H3 is displayed on control box If Your TV Leans Forward at the Home Position MaintenanceHome Automation Controls To register by mail WarrantyPurchaser Information Product Information