Tascam MD-301mkII user service Troubleshooting, Specifications, Toc

Troubleshooting

If you have any problems with the deck, please check the following before calling for service. If the trouble persists, please consult your dealer or nearest TEAC service agent.

Problem	Remedy
No operations are possible.	The MD is dirty or damaged. If "Disc Error !" is display-
	ed in this case, replace the MD with another disc.
Playback will not start.	Check if power is supplied.
	"Blank Disc" is displayed if the MD contains no record-
	ed data. "No Track !!" is displayed if no tracks have been
	recorded on the disc. Replace the MD with a pre-
	recorded MD.
	When "UTOC Error !" is displayed, replace the MD with
	another disc.
	There may be condensation inside the deck. In this case,
	eject the MD and leave the deck on for a few hours.
Recording will not start.	When "Protected !!" is displayed, the MD is protected
	against accidental erasure. Slide the accidental
	erasure protection tab to close the hole. A playback-only
	MD is loaded. Replace the MD with a recordable one.
	When "D-IN UNLOCK !" is displayed and the source audio
	is not input, connect the source through digital connection
	or record the audio using the analog input.
	Timer recording is unavailable.
	After timer recording, turn the power back on within 3 or
	4 days and eject the MD. If the deck is left off for a long
	time, the recorded contents may disappear.
	When "Disc Full !!" is displayed, the disc has no remain-
	ing time available for recording. Erase unnecessary
	tracks or use another MD.
	When "Rec Error !!" is displayed, there is an error in
	recording. Restart recording from the beginning.
Too much noise.	Do not operate this deck near a TV.

…If normal operation cannot be recovered, unplug the power cord from the outlet and plug it again.

ªU-TOC

Editing recorded tracks is easy with
recordable MiniDiscs. Information about
the recorded tracks (start address, end
address, title, etc.) is recorded in the U-
TOC (User Table Of Contents) area. You can	Music Data
U-TOC
edit tracks simply by rewriting this data.

Specifications

Format: MiniDisc digital audio system

Recording system:

Magnetic field modulation overwrite system

Recording/playback time: Stereo: 74 minutes max. Mono: 148 minutes max.

Sampling frequency: 44.1 kHz

Compression system: ATRAC (Adaptive TRansform Acoustic Coding)

Dynamic range:

More than 94 dB (playback, 1 kHz, A filter)

Total harmonic distortion: Less than 0.013%

Number of channels: 2 (stereo),1 (mono)

Frequency response:

20 Hz – 20 kHz ± 0.5 dB (playback)

Signal-to-noise ratio:

More than 94 dB (playback, A filter)

Analog input/output connectors: Input:

Balanced: XLR, +4 dBu (ref.), 10 kohms

Unbalanced: RCA, –10 dBV (ref.),

`50 kohms Output:

Balanced: XLR, +4 dBu (ref.), 150 ohms

Unbalanced: RCA, –10 dBV (ref.),

600ohms

Power supply:

120V AC, 60 Hz (U.S.A./Canada model),

230V AC, 50 Hz (Europe/General export model),

240V AC, 50 Hz (Australia model)

Headphones output: Max. 25 mW + 25 mW,

32ohms

Digital input/output connectors: Input 1, 2:

TOS (EIAJ RC-5720), IEC60958 Type II (S/PDIF)

Output:

TOS (EIAJ RC-5720), IEC60958 Type II (S/PDIF)

Remote connector:

KEYBOARD connector: Mini DIN 6pin Power consumption: 13 W

Dimensions (W x H x D): 482.6 x 94 x 313 (mm)

Weight: 5.5 kg

Accessories:

Remote control unit (RC-32) x 1 Battery (SUM-3, "AA", "R6" type) x 2 Lettering guide x 1

Rack mounting screw kit x 1

…Improvements may result in specifi- cations or feature changes without notice.

…Photos and illustrations may differ slightly from production models.

*US and foreign patents licensed from Dolby Laboratories Licensing Corpora- tion.

– 22 –