Tascam MD-301mkII Normal Playback, To play a track located before or after Current track

Page 9

Playback

Buttons used on this page

Normal Playback

1. Press the [POWER] button.

"NO DISC" appears on the display.

Turn on the amplifier and set the input selector to MD.

2. Insert an MD.

Hold the MD with the label side up.

Insert in the direction of the arrow.

After the TOC (Table Of Contents) data has been read, the disc title (when the disc has a title assigned to it), the total number of tracks and the total playing time of the disc are displayed.

Total number of tracks Disc title

3.Start playback.

Press the [¥PLAY] button ("¥" lights up). Playback starts from the first track and

"001" appears on the "TRACK NO." display.

When the disc finishes playback, the track numbers disappear from the music calendar.

If the total number of tracks exceeds 20

("" lights up), the track number should be confirmed on the TRACK NO. display.

Press the [¥PLAY] button immediately after recording is stopped (within 10 seconds) to play back a track which has just been recorded from the beginning.

If ten seconds or more have passed after recording is stopped, or if the [¥PLAY] button is pressed after pressing the [ªSTOP] button, playback starts from the first track of the disc.

4.To stop playback, press the [ªSTOP] button.

ªTo stop playback temporarily (ready) Press the [πREADY] button ("π" lights up). Press the [¥PLAY] or [πREADY] button

to resume playback.

ªTo play a track located before or after

the current track

Turn the [µTRACK] dial.

If you are operating the remote control unit, select the desired track by pressing the [µTRACK] buttons or entering the track number with the numeric buttons.

The selected track number starts playing.

ªTo eject the MD

Press the [øEJECT] button.

ªHeadphones

When using headphones, connect the headphone plug into the PHONES jack.

Adjust the level of the signals output from the phones jack.

Condensation

When the deck is moved directly from a cold to a warm location or when the temperature is raised suddenly in the room where the deck is installed, moisture may condense inside the mechanism. This will prevent the deck from operating normally and may result in damage to the MD or to precision parts. If condensation occurs, turn on the deck and leave it for an hour or two until the moisture evaporates.

ENGLISH

Music calendar

The disc or track title can be scrolled on the display with the [SCROLL] button on the remote control unit. After scrolling, the title returns to its original display.

– 9 –

Image 9
Contents MD-301@# Important Safety Instructions Optical pickup Type KMS-260A Label required in this reguration is shownManufacturer Laser output 55 mW Wavelength 785 ±20 nmBefore Use ContentsWhen D-IN Unlock ! blinks When Protected !! is displayedRemote Control Unit Handling MDsRack Mounting ConnectionsVoltage Conversion ConnectionªSTOP button p ¥PLAY button a πREADY button Name of Each ControlNumeric buttons 1 to 9, 0, +10 g REPEAT/A-B buttons Sync Record button Upper/Lower case button Aß∑aRecording an MD RecordingTo protect an MD against accidental erasure Display Selected InputPlayback HeadphonesNormal Playback To play a track located before or after Current trackAdjusting the Recording Level Monitoring the Input SignalUseful Tips for Recording Assigning Track Numbers During RecordingSync Recording Timer RecordingChecking the Remaining MD Recording Time Checking the Recorded TracksUseful Tips for Playback Using the Display WindowSelecting the Desired Track Playing Tracks in Random Order Shuffle PlaybackWhen Recording to Analog Tape Repeating Tracks Repeat Playback Timer PlaybackErasing Tracks Erase Function Editing Recorded MDsMoving a Track Move Function Combining Tracks Combine FunctionExample Combining B and C Example To move D from track number 4 to track numberPress the Display button to select the character type Assigning Titles Title FunctionCopying a Title Title Copy Function Changing entered charactersOptional Functions System Restrictions ªEditing keysTitle entry keys Display Messages Guide to the Serial Copy Management System Serial Copy Management System… Rule Troubleshooting SpecificationsTOC To the User