Connections, Rack Mounting, Voltage Conversion

Rack Mounting

Install this deck with the provided mounting screw kit as illustrated.

Connections

Voltage Conversion

(For general export models)

Be sure to remove the power cord from the AC outlet before repositioning the voltage converter switch.

1.Locate the voltage selector on the rear panel.

2.Using a flat-bladed screwdriver, set to the appropriate 230 V or 120 V position according to your area.

IN NORTH AMERICA	DANSL'AMERIQUE
USE ONLY ON 120 V	DU NORD:
SUPPLY.	UTILISABLE SUR 120 V
	D'ALIMENTATION
	UNIQUEMENT.

…Turn off power for all equipment before making connections.

…Read instructions of each component you intend to use with the MD deck.

ªConnection

ANALOG INPUT/OUTPUT (BALANCED/UNBALANCED) terminals Use these terminals to connect the deck to a mixer, cassette tape recorder or other components.

…Be sure to insert each plug securely. To prevent hum and noise, do not bundle the connection cords with the power cord or speaker cord.

DIGITAL INPUT 1/OUTPUT terminals

Use these terminals to connect the deck to a digital component (such as a CD player, DAT deck, digital amplifier, or another MD deck).

…Use a digital optical (TOS) cable (optional) for digital recording. Connect the [DIGITAL IN 2] terminal located on the front panel to a digital component such as a DAT/MD deck.

…When making a digital connection, remove the caps from the terminals. When the terminals are not in use, leave the caps in place.

ªPower cord

Be sure to connect the power cord to an AC outlet which supplies the correct voltage.

…Hold the power plug when plugging or unplugging the power cord.

– 6 –