HP Hickory Rotis N/45WDG Description of the Electrical Connection, Electrical Diagram All Models

Hickory Industries, Inc.

When first installing, after repairing, or after cleaning the units, it is important to make sure that all components are properly in place.

a.There should be a total of 9, evenly spaced ceramic bricks sitting above each main pipe burner.

b.The ceramics must be sitting directly on the burners. These ceramic

bricks should also be placed so that they fit between the ceramic support rods.

c.The burner pipes should not have any holes (flames) directly below the pilot

burner assembly. If holes (flames) are present, they will overheat the thermocouple or blow out the pilot flame, preventing the main burner from staying lit.

1.14Description of the Electrical Connection

The electrical connections are to be made in accordance to local and national codes.

All gas machines operate with 120 Volt, single phase, 60 Hz. A NEMA 5-15P plug is supplied with the units.

All pertinent electrical information can be taken from the electrical diagram.

1.15Electrical Diagram - All Models

	L
	M
L	N

4900 Westside Avenue, North Bergen, New Jersey 07047	N/45 Series Manual12/00
Tel: [201] 223-0050 Fax: [201] 223-0950	Page 14 of 38